| |
12-06-2011, 02:04 AM
| #1 |
| Quarry Creeper Join Date: Jun 2009 Location: Visalia, CA
Posts: 345
|  Need help!!
Just got my rig back together and now have electrical problems. Im running a Holmes ESC, HH tm expert 35t spektrun rx, hitec 7950 servo. Nothing new but the motor. Problem is when the servo is plugged in the rx I can see sparks comming from the motor and watching the spur gear it seems to be twitching back and forth. When I un plug the servo and get on the throttle the motor runs perfect. I have never had any issue like this. Any suggestions?
|
|  |
| Sponsored Links | |
| | |
|
12-06-2011, 08:36 AM
| #2 |
| Quarry Creeper Join Date: Feb 2010 Location: Knee deep in a creek with a fish on the line
Posts: 456
|
What brand of servo is it? I had a bad mother board on one of my servos, and it messed up the whole system. the servo would get very hot in a matter of 10-30 seconds and the throttle would glitch. I think mine was a hitech, but any short in the servo will have the same effect no matter what brand.
|
|
| |
 |
| |
Linear Mode
