01-06-2012, 10:44 AM | #1 |
Newbie Join Date: Dec 2011 Location: Las Vegas
Posts: 9
| Getting Closer
I am getting closer to getting the berg 2.2 working. I did some soldering and powered g/programmed up the Novak M2 and connected the receiver and an Optic 6 (air tx). I have stearing working, although it does not turn very tight. I increased the EPA to 125% and that helped. I have front and rear motion. The only think I am still working on is the dig and sticks to use for control. I had the dig working on channel 3 stick but then moved it to a rear left lever and now it is not working. I may move it back to a different channel. It was working once so it should work again. I have throttle on a LHS, centered left-right stick, but another poster was right, it is not that great there. I am using a 2S lipo and it seems to have enough power but have not tried anything too steep. I still need to secure the rx and the battery too. So far so good. Thanks. |
Sponsored Links | |
Getting Closer - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Getting closer | losikid | Chit Chat | 3 | 11-16-2011 11:52 PM |
Well...I am getting closer... | CatButt | Newbie General | 5 | 03-24-2011 09:20 PM |
GM one step closer | Mr.Slave | Chit Chat | 22 | 04-23-2009 04:50 PM |
TLT-10 is finally getting closer to completion! | BoilermakerFan | Tamiya TLT Crawlers | 16 | 03-12-2005 08:04 PM |
Belly Dragger Getting Closer!!!! | DirkDigler | General Crawlers | 26 | 07-29-2004 07:42 PM |
| |