|
| LinkBack | Thread Tools | Display Modes |
01-10-2012, 02:58 AM | #1 |
Newbie Join Date: Mar 2011 Location: Magna ut
Posts: 45
| Castle Creations 1/10 SV2 Sidewinder ESC
dose any one know the brushed turn limit for this omot on 3 cell lipo i want to know if i can run a 19 x2 on this speed contole any help would be great thanks
|
Sponsored Links | |
01-10-2012, 07:56 PM | #2 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
Personally I wouldn't suggest using a 3S with any brushed motor and an SV2. I had three die on me with a 2s and mild 35-55 turn motors over the course of six months. But I have one powering a 3800kv 4 pole brushless that still works after almost a year, and it runs much cooler than the others running much less powerful brushed motors. |
01-10-2012, 09:29 PM | #3 |
I wanna be Dave Join Date: Sep 2008 Location: four o six
Posts: 2,101
| Re: Castle Creations 1/10 SV2 Sidewinder ESC |
01-10-2012, 11:11 PM | #4 |
Newbie Join Date: Mar 2011 Location: Magna ut
Posts: 45
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
Ok thanks guys I went to the lhs and found out all I needed but personal exp is gladly appreciated
|
01-11-2012, 12:39 AM | #5 |
I wanna be Dave Join Date: Dec 2009 Location: San Francisco
Posts: 2,236
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
I dont know why people are having so many problems with them because I have 2 and they work flawlessly in both my rigs. They are great for the money, I wouldnt compare them to a BR-XL or MMP but I just picked up 2 more for $35 a piece from ebay brand new. |
01-11-2012, 12:57 AM | #6 |
Rock Crawler Join Date: May 2009 Location: Queensland, Australia
Posts: 610
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
The brushed motor limit of the SV2 is listed at 19t (same as the original sidewinder). I've personally run a 19t on 3s, motor was stupid hot esc was about 65°c on the heat sink. I'm also not sure why so many people have had a bad run with SV2s, I've bought 6+ since they came out and only one has recently given up the ghost in mysterious circumstances. |
01-11-2012, 01:31 AM | #7 |
Newbie Join Date: Mar 2011 Location: Magna ut
Posts: 45
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
Ok I stick with a 35 t on mine I was thinking on runnin a new 19x2 turn but I don't want to over heat it so ya thanks again keep them comin pls
|
01-11-2012, 02:32 AM | #8 |
I wanna be Dave Join Date: Dec 2009 Location: San Francisco
Posts: 2,236
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
Also a lot of the short course guys put a fan on top of the heatsink so that is an option if the esc is getting too warm.
|
01-11-2012, 03:07 AM | #9 |
Newbie Join Date: Mar 2011 Location: Magna ut
Posts: 45
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
Ok sweet thanks love the info
|
01-11-2012, 10:34 AM | #10 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: Castle Creations 1/10 SV2 Sidewinder ESC I really hope you were not thinking of a 19T double on a crawler!! Most think a 35T is about as low as you go! |
01-11-2012, 02:05 PM | #11 |
Newbie Join Date: Mar 2011 Location: Magna ut
Posts: 45
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
I was thinking tough truck
|
01-11-2012, 09:26 PM | #12 |
Gold Star Baby! Join Date: Jan 2011 Location: SOUTH JORDAN, UT
Posts: 1,245
| Re: Castle Creations 1/10 SV2 Sidewinder ESC
I bought 2 SV2's.... Wired them up. Hooked da 2S to do the programing on the feild card. And now one of them wont power up at all. I haven't even put this junk on a motor yet.... i can see I need to go another rout. The CC ESC's are not very good. From what I have seen.
|
Castle Creations 1/10 SV2 Sidewinder ESC - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Castle Creations SV2 or Sidewinder SCT with two motors? | Big Pitt | Electronics | 24 | 06-20-2011 04:49 AM |
Castle Creations Sidewinder SV2 | KC_JoNeS | Electronics | 20 | 03-05-2011 06:20 AM |
Thread Tools | |
Display Modes | |
| |