Novak goat 3s bec help please
 

I want to hook up the bec that came with it so i can run my 3s lipo and dont know how to do it any help? i have a spektrum sr300 which slot do i plug it into?do i disconnect the red from my esc? im a noob please help!

Re: Novak goat 3S BEC help please
 

External BEC (regardless of brand) has it's input wires connected to the pack-to-ESC wires. Then, you can (worst choice in my mind) plug the BEC output into any open port on the RX (after removing & taping the red wire from the ESC to RX connection).

Better (in my mind) is to wire the external BEC direct to the servo. Plenty of wiring discussions on how to do this in this forum.......

Re: Novak goat 3s bec help please
 

I have two servos.

Re: Novak goat 3s bec help please
 

So you need a servo splitter cable (AKA "Y" cable) to go from the BEC output to each servo.
I believe the wiring stickie has this covered as well.