Ae-2 esc Can I run LiPo's with this ESC (AE-2) in my rtr honcho? I would like to get a second battery and heard I can get more run time and consistant power from a LiPo battery. Thanks. |
Re: Ae-2 esc yes it just needs the lipo cutoff turned on (use manual). its rated for 2s (7.4v) lipos |
Re: Ae-2 esc Sounds good, Thanks man! |
Re: Ae-2 esc Quote:
Yes, LiPO has a flatter discharge curve compared to NiCD or NiMH packs. |
Re: Ae-2 esc I have the AE-2 and will be running an Onyx 2S 25C 5000mah lipo! The AE-2 comes pre-set with auto lipo on! |
Re: Ae-2 esc So I would be able to switch between a LiPo and a NiMH pack with out setting up my ESC each time? |
Re: Ae-2 esc Quote:
Other than that, volts are volts. |
Re: Ae-2 esc They come set to auto lipo so it has probably been on this whole time. You will probably get more runtime out of your non LIPO packs by turning the cutoff off while you arent using LIPOs. |
Re: Ae-2 esc How do I go about turning it on or off, how can I tell if it is on or off? |
Re: Ae-2 esc get a castle link and plug it in. you can change a few settings on the esc besides lipo cutoff. it's worth getting a link that way WHEN you add an external bec you can program it also!! |
Re: Ae-2 esc Is a castle link the only way to do it? What is a external bec? |
Re: Ae-2 esc Quote:
|
Re: Ae-2 esc Thanks for all the info guys! |
Re: Ae-2 esc Quote:
You can manually program the AE-2 ESC also. The info is on Axials website. It sounds like a pain in the ass to do it this way but it can be done. |
Re: Ae-2 esc i used a 2s in my honcho with the ae-2 and it did a lot better than a nimh i ran a venom 2s 30c discharge with 4000mah. im not sure how long it would run for i never did run my 2s untill the cut off came on. |
All times are GMT -6. The time now is 11:40 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com