Brushed ESC for 4s? Are there any brushed only ESC's out there that will handle 4s? I'm running a 55T motor in a pede/tlt crawler and 3s is too slow. I'm running a 12t pinion now (with 3s) and like the low speed torque. I have tried a 15T and like the high speed better than the 12T but it's still not fast enough. I even tired a 18T. The 18 was probably fast enough but it didn't have enough low speed torque. What to do? What to do? |
Re: Brushed ESC for 4s? Holmes Hobbies BR-xl is the way to go for high voltage hands down. We run dual BR-xl's in a XR comp rig on 4s, with 13t pinions, massive wheel speed but all the low end creep you want as well "thumbsup" |
Re: Brushed ESC for 4s? |
Re: Brushed ESC for 4s? 6s :shock: I'm not sure the poor little Lathe motor would handle that. Might turn it into a mushroom cloud. It would be fun to try though. I do have 2 3s packs and a Y harness. :twisted: |
Re: Brushed ESC for 4s? I think I'd try a good 35T motor. You can use the old green Mamba Max ESC and cut the white wire off. It says up to 3s but plenty of people run it on 4s. |
Re: Brushed ESC for 4s? The O.G. Castle Sidewinder if you roll back the firmware you can run 4s! I wouldn't recommend it for long though but would be fun for extra punch. On my 11 pound KOH tuber I am running a BRXL on 4s with a 10T puller...tons of torque!!! I might want to gear up a bit and see if I can turn it into a rock racer... |
Re: Brushed ESC for 4s? I would swap to a faster motor before investing in a different ESC and new batteries. A 35t will be a significant bump in speed. |
Re: Brushed ESC for 4s? Well see the thing is I kinda let the magic smoke out of my last ESC.:oops: So I need a new ESC anyway. |
Re: Brushed ESC for 4s? Go with a ae-2 35t motor on 16t pinion on 2s is fast for a crawler. |
Re: Brushed ESC for 4s? Quote:
|
Re: Brushed ESC for 4s? AE-2 here with a 27t, 20t pinion, 2s......too fast!!! Kinda fun tho as long as you turn down the steering. If not......FLOP... |
All times are GMT -6. The time now is 10:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com