Dig with 2 fxr's?

[jado6006]

Hey crawlers! Was given solid advice about the M2 that i had in my berg-so it's gone. Dropped in an fxr w/elec berg dig. Had both already. Ordered up a 2nd, & a novak dig. Got word that this is optimal for my dx3e. This is all centered around the fact that my rear axle isn't locking when i hit the dig(front also).Willthis work w/my radio setup? Dont care much about proportional control. Just want solid lock when it's needed! I assume i need a dig cuz i have no mixing with my tx? No plans to comp, but that could change. Got tired of the comp scene, but never had a berg b4 either. Anyway, is there anything out of the usual with the wiring? Have a cc bec w/airtronics 430oz servo. Only runnin 2s rite now, but have the cap on the fxr, just in case i feel like ordering up a few 3s crawler packs. Just hope this solves my issues! Any advice is welcome, thanks!

[Charlie-III]

I don't if your radio supports it, but dual ESC's and a WantAmix is better (in my opinion) than a dig since I've run a single ESC/servo dig before.

Link... Products - OverkillRC

A little more info..... Dual ESC Adapter (Proportional + Dig) for DX3R or 3PM-MX

No real tricks to the wiring, pretty straight forward for either route.

[losikid]

So you get rid of the novak m2 mixer just to get another novak mixing product?

[crawl-o-matic]

I was thinking the same thing...

Originally Posted by losikid

So you get rid of the novak m2 mixer just to get another novak mixing product?

[jado6006]

Had my share of novak. Plenty of good luck--not including esc's. I dont dig on blanket statements, with regard to manufacturers. I've had plenty from everyone. Everybody hates integy, or so you'd believe. But it seems like every other rig i see is running their motor(s). That tells me there's lotsa b.s. floating around.haha