Does anyone on here rebuild jp warrior motors?
 

I have a jp warrior 35t motor that one of the I'm assuming brushes is bad. I like an idiot took it apart and now I can't get it back together. Does anyone rebuild these or should I just get a new motor.

http://img.tapatalk.com/b8aaaaa7-d9e1-5ea0.jpghttp://img.tapatalk.com/b8aaaaa7-d9eb-98a9.jpghttp://img.tapatalk.com/b8aaaaa7-d9f3-d960.jpg

Sent from my SGH-I777 using Tapatalk 2

Re: Does anyone on here rebuild jp warrior motors?
 

they are relatively easy to put back together.
i dont have experience with a warrior engine but ive done quite a few others!

I tried but I can't get that brush back in. And the end of it is chipped off. I'm thinking about just buying a new motor but I have no idea what to go with

Sent from my SGH-I777 using Tapatalk 2

Re: Does anyone on here rebuild jp warrior motors?
 

i wouldnt jump to that just yet.
do you have a picture of the top of the cap and there should be a screw to remove one end of the brushes and a spring that pushes the block of the brushes into the engine and then just buy new brushes!
thats what im doing to my novak 55t so i can sell it! haha
and what are your running this engine in?

I got to looking at it. One of the springs is way to tight and was pushing the brush against the comm. The com has a few tiny chips in it.

Sent from my SGH-I777 using Tapatalk 2

Re: Does anyone on here rebuild jp warrior motors?
 

Someone correct me if I am wrong but I think Jp motors were built by eddieO

Re: Does anyone on here rebuild jp warrior motors?
 

PM EddieO. He built the warrior motors and rebuilds any motor for cheap

OK thanks guys. I will do that

Sent from my SGH-I777 using Tapatalk 2

Re: Does anyone on here rebuild JP warrior motors?
 

If it's a "check point" type motor, then yes, there is a cap that pushes the brush in.
All other rebuildable motors have a spring that pushes a rectangular brush in.

PS, if it's electric, it's called a motor, NOT an "engine".

Re: Does anyone on here rebuild jp warrior motors?
 

yea thats sorta what i was trying to get at charlie! ahah

Re: Does anyone on here rebuild jp warrior motors?
 

If you don't have any luck, LMK and you can ship it or them to me.

I just finished turning and rebuilding a set. Sold them to a friend here locally for his MOA build.



JC
8)