Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: noob with a HobbyKing Turnigy 9x

Reply
 
LinkBack Thread Tools Display Modes
Old 06-23-2012, 06:25 AM   #1
RCC Addict
 
Join Date: Jun 2010
Location: Australia NSW
Posts: 1,266
Default noob with a HobbyKing Turnigy 9x

Hi guys. i bought this Tx a while back now purely because it was cheap, and seemed to be the ultimate value.

straight up, ive never used anything like this before ever, and after looking through some of the threads in the hobbyking forum, its all like a different language :(

my first problem is that im not using it in a flying RC. more so, a Motor on axle scale truck.

i think ive worked out how to set it so i can run both axles, motor and steering independantly, which is fine, but first thing i would like to know:

is there a way that i can run both axles off one channel, so they both drive together forwards or backwards, and have the other stick apply braking/dig to the rear axle? both ESCs will each have their own battery, and obviously be run on separate channels.

second Q, is i want to use a servo/winch on one channel.

can i set it up so that one of the toggle switches turns a channel on/off and then route it through one of the pots for forward/backward speed? so, like turn the pot 60%, then flick the switch and have the servo run at 60% speed, then flick the switch off, move the pot to -60%, flick the switch and have the servo move in reverse at the same speed??

i really dont know if it will work like this but it doesnt hurt to ask.

i currently have it set in glider mode, which seems to be the best for what ive managed to work out by watching youtube, and searching the web/forums.

thanks.
Klampy.
klampykixx is offline   Reply With Quote
Sponsored Links
Reply



noob with a HobbyKing Turnigy 9x - Similar Threads
Thread Thread Starter Forum Replies Last Post
hobbyking S.C. yoda Electronics 25 12-19-2011 03:51 PM
Hobbyking?? rocksteadily Electronics 16 02-21-2011 06:05 PM
Hobbyking esc. THE CRAWLER KING Electronics 21 01-01-2011 01:12 PM
Hobbyking will1978 Electronics 19 07-09-2010 02:12 PM
HobbyKing Turnigy 7.4v Lipo Dead Grumpster1980 Electronics 5 03-18-2010 11:24 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com