Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: GT3C Pre-order

Reply
 
LinkBack Thread Tools Display Modes
Old 06-28-2012, 12:45 AM   #1
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default GT3C Pre-order

I'm now taking pre-orders for GT3C's, they are indeed the silver version.

You can order and check pricing here

Products - OverkillRC

The GT3C is the updated version of the GT3B...it uses the SAME firmware (0.6.1 and newer), but its hacked abit differently.

The new advatages to the gt3c
  • Built in (w/ charge circuitry) 1s Lipo
  • Silicone hand grips (Small and large size)
  • Extremely light weight
  • white backlight (easier to see in daylight)
  • IMO, it feels like a higher quality radio

It still has the same switch layout, however they do seem slightly easier to push/control than the gt3b


For those whom arn't aware of the new firmwares features it offers
  • 2-8 Channels
  • About 60 model memory
  • Firmware has been tweaked to make it faster than stock through 0.4.1 firmware
  • Dual ESC mixing and 4WS mixing
  • MultiPostion switch-Offers up to 8 true postions, 8 postions in any order you want thats is cycled through with a switch
  • Extensive key mapping options
  • Count down and count up timers and a lap counter (could be used as a reverse counter or something)
  • EPA's on ALL channels
  • Dual rates, trim, subtrim, expo, abs braking, etc
  • Channel speed, deadband, adjustable low voltage alarm
  • Plus ALOT more

If this radio can't do something that you need/want, just lmk and we can probably get it added to a future firmware release.


Here soon overkillrc is going to start developmeant of a new add on board for the gt3c and gt3b radio for pc and mobile device programming and then we'll work a whole new supercharged gt3c motherboard replacement which will offer pc and mobile device programming, an ultra fast budget friendly 9ms latency module, high res lcd, telemetry, add on ports for more switches and other future overkill hop ups.
losikid is offline   Reply With Quote
Sponsored Links
Old 06-28-2012, 12:50 AM   #2
Pebble Pounder
 
Join Date: Sep 2011
Location: Joliet
Posts: 181
Default

Are these hacked or stock?
gottwins? is offline   Reply With Quote
Old 06-28-2012, 12:56 AM   #3
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default Re: GT3C Pre-order

Quote:
Originally Posted by gottwins? View Post
Are these hacked or stock?
I offer both a hacked and not hacked version...click the link in the first post to see the options
losikid is offline   Reply With Quote
Old 06-28-2012, 08:12 AM   #4
Pebble Pounder
 
Join Date: Sep 2011
Location: Joliet
Posts: 181
Default

Damn tapatalk I didn't see the link thanks
gottwins? is offline   Reply With Quote
Old 06-30-2012, 10:43 AM   #5
I wanna be Dave
 
Join Date: Dec 2006
Location: Goin broke losing weight.....
Posts: 2,262
Default Re: GT3C Pre-order

Have you come up w the setup instructions to program channels now? I'm just about ready to set mine up.

I'm thinking 6 channels to start. Throttle, steering, fr winch, rr steer, rr winch, 2 pos for 2 speed tranny
Erin is offline   Reply With Quote
Old 06-30-2012, 12:57 PM   #6
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default Re: GT3C Pre-order

Quote:
Originally Posted by Erin View Post
Have you come up w the setup instructions to program channels now? I'm just about ready to set mine up.

I'm thinking 6 channels to start. Throttle, steering, fr winch, rr steer, rr winch, 2 pos for 2 speed tranny
No not yet, when your ready just Lmk what switch does what and ill help you get it setup
losikid is offline   Reply With Quote
Old 07-01-2012, 08:09 AM   #7
RCC Addict
 
Join Date: Dec 2011
Location: Raleign
Posts: 1,439
Default Re: GT3C Pre-order

Nice work! For anyone who hasn't dealt with LosiKid yet, he's top notch. I purchased a programmer kit and a bunch of stuff for my GT3B and shipping was fast.
ik632 is offline   Reply With Quote
Old 07-05-2012, 01:01 PM   #8
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default Re: GT3C Pre-order

These will be shipping in 1-2 weeks if all goes well with customs...
losikid is offline   Reply With Quote
Old 07-05-2012, 01:40 PM   #9
Newbie
 
Join Date: Apr 2012
Location: Southern Maine
Posts: 37
Default Re: GT3C Pre-order

Just curious, I read that it has a USB cord for charging.. Could I use my cube from my Blackberry or iPhone and then use it as a wall charger?
sedative is offline   Reply With Quote
Old 07-05-2012, 01:57 PM   #10
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default Re: GT3C Pre-order

You can charge the gt3c with a wall charger if thats what your asking...it uses a mini usb
losikid is offline   Reply With Quote
Old 07-05-2012, 07:18 PM   #11
RCC Addict
 
Join Date: Dec 2011
Location: Raleign
Posts: 1,439
Default Re: GT3C Pre-order

I was looking at your site and you have flashed ones and ones flashed and with programming port installed. How are you flashing them without the port installed?
ik632 is offline   Reply With Quote
Old 07-05-2012, 07:28 PM   #12
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default Re: GT3C Pre-order

Quote:
Originally Posted by ik632 View Post
I was looking at your site and you have flashed ones and ones flashed and with programming port installed. How are you flashing them without the port installed?
Special equipment...
losikid is offline   Reply With Quote
Old 07-07-2012, 02:49 AM   #13
Pebble Pounder
 
Join Date: Jul 2012
Location: Portland
Posts: 156
Default Re: GT3C Pre-order

Oh sure, now they are ready to go! Damn, if you would have had these two weeks ago I wouldn't have pulled the trigger on a DX3C. I presume your supplier got all the problems fixed that kept you from wanting to sell any of these like you described in your email to me?
Dini is offline   Reply With Quote
Old 07-07-2012, 09:19 AM   #14
Tire&Foam Extraordinaire
 
Nova's Ark's Avatar
 
Join Date: Jun 2007
Location: C.I. Compound, Tyler, Texas
Posts: 5,601
Default Re: GT3C Pre-order

Bump for a great vendor with excellent customer service Thank you Austin for all your help with my GT3B's.
Nova's Ark is offline   Reply With Quote
Old 07-07-2012, 07:39 PM   #15
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default Re: GT3C Pre-order

Quote:
Originally Posted by Dini View Post
Oh sure, now they are ready to go! Damn, if you would have had these two weeks ago I wouldn't have pulled the trigger on a DX3C. I presume your supplier got all the problems fixed that kept you from wanting to sell any of these like you described in your email to me?
I'm told the issue is fixed
losikid is offline   Reply With Quote
Old 07-07-2012, 07:45 PM   #16
RCC Addict
 
Join Date: Mar 2009
Location: Interior BC
Posts: 1,786
Default Re: GT3C Pre-order

daaayuuum that is a sexy radio!
lotsa features, does my wallet ever stand a chance in this hobby? hahah
SwampDawg is offline   Reply With Quote
Old 07-08-2012, 01:06 AM   #17
Pebble Pounder
 
Join Date: Jul 2012
Location: Portland
Posts: 156
Default Re: GT3C Pre-order

Well, I am still going to need another radio/receiver for my tuber. So maybe I will look you up when it's time.
Dini is offline   Reply With Quote
Old 07-18-2012, 11:14 AM   #18
Rock Stacker
 
Join Date: Dec 2010
Location: naperville
Posts: 53
Default Re: GT3C Pre-order

Quote:
Originally Posted by ik632 View Post
I was looking at your site and you have flashed ones and ones flashed and with programming port installed. How are you flashing them without the port installed?
He opens them up to access the the pinouts neccessary to flash them then closes them back up, and by special equipment he means the same kit hes selling lol.
bizzyb is offline   Reply With Quote
Old 07-18-2012, 11:59 AM   #19
Got Worms?
 
Join Date: Jun 2009
Location: Golden, CO
Posts: 6,116
Default Re: GT3C Pre-order

Quote:
Originally Posted by bizzyb View Post
by special equipment he means the same kit hes selling lol.
Actually ben, your're 100% wrong...i don't use a single component from my hack kit to flash a radio w/out a header
losikid is offline   Reply With Quote
Old 07-25-2012, 11:43 AM   #20
Newbie
 
Join Date: Apr 2012
Location: San Diego
Posts: 32
Default Re: GT3C Pre-order

What's the current turn-around time on these?
marc. is offline   Reply With Quote
Reply



GT3C Pre-order - Similar Threads
Thread Thread Starter Forum Replies Last Post
RC4WD Club pre-order jeepguy7891 Illinois 3 07-06-2008 02:37 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com