Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: could i run a punk dig on a outcry esc?

Reply
 
LinkBack Thread Tools Display Modes
Old 09-04-2012, 05:58 AM   #1
Rock Crawler
 
Join Date: Mar 2011
Location: hampton
Posts: 984
Default could i run a punk dig on a outcry esc?

i got a outcry dual motor esc in a xr10 i picked up saturday. can i wire in a punk dig to the rear motor?
my radio is a flysky gt3b thats not hacked.
stanmondz is offline   Reply With Quote
Sponsored Links
Old 09-04-2012, 08:01 AM   #2
I wanna be Dave
 
Join Date: May 2007
Location: Vancouver, BC
Posts: 2,376
Default Re: could i run a punk dig on a outcry esc?

Quote:
Originally Posted by stanmondz View Post
i got a outcry dual motor esc in a xr10 i picked up saturday. can i wire in a punk dig to the rear motor?
my radio is a flysky gt3b thats not hacked.
You should be able to get the Punk to lock and unlock your rear axle.

I'm curious about your ESC. I'm wondering if it is okay to connect both motor outputs in parallel. If that were the case, you could run one of my dig controllers and get both front and rear dig from your two position third channel.

MOA Dig Controller for Two Position Channel
heyok is offline   Reply With Quote
Old 09-04-2012, 10:04 PM   #3
Pebble Pounder
 
Join Date: Nov 2011
Location: Fresno
Posts: 165
Default Re: could i run a punk dig on a outcry esc?

Currently running this in my daughters' RS10. Just unsolder one red and one black wire. Run the left over ones into the Punk....

(HACK THAT SHIZZNET!!!) Cheap and way worth it! Or run the Heyok. Either is a great way to go.


Quote:
Originally Posted by heyok View Post
You should be able to get the Punk to lock and unlock your rear axle.

I'm curious about your ESC. I'm wondering if it is okay to connect both motor outputs in parallel. If that were the case, you could run one of my dig controllers and get both front and rear dig from your two position third channel.

MOA Dig Controller for Two Position Channel
Sydwall85 is offline   Reply With Quote
Old 09-05-2012, 05:50 AM   #4
Rock Crawler
 
Join Date: Mar 2011
Location: hampton
Posts: 984
Default Re: could i run a punk dig on a outcry esc?

Quote:
Originally Posted by Sydwall85 View Post
Currently running this in my daughters' RS10. Just unsolder one red and one black wire. Run the left over ones into the Punk....

(HACK THAT SHIZZNET!!!) Cheap and way worth it! Or run the Heyok. Either is a great way to go.
you mean the esc output wires? or the wires coming from the dig to the motors? happen to have a pic you could post?

Heyok, wouldn't that double the voltage going into the dig? im running 2s packs. could a dig handle 16.8v from a fresh lipo?
stanmondz is offline   Reply With Quote
Old 09-05-2012, 06:26 AM   #5
I wanna be Dave
 
Join Date: May 2007
Location: Vancouver, BC
Posts: 2,376
Default Re: could i run a punk dig on a outcry esc?

Quote:
Originally Posted by stanmondz View Post
you mean the esc output wires? or the wires coming from the dig to the motors? happen to have a pic you could post?

Heyok, wouldn't that double the voltage going into the dig? im running 2s packs. could a dig handle 16.8v from a fresh lipo?
That would be really something if it would double the voltage, but no, it wouldn't work that way. Most likely, there are a pair of output FET devices and each has two red or two black wires on them that you are expected to run to your two motors. The extra pair of wires are put in to make it convenient for you to connect them to the motors.
heyok is offline   Reply With Quote
Old 09-05-2012, 07:21 PM   #6
Rock Crawler
 
Join Date: Mar 2011
Location: hampton
Posts: 984
Default Re: could i run a punk dig on a outcry esc?

makes sense
stanmondz is offline   Reply With Quote
Old 09-05-2012, 07:59 PM   #7
Pebble Pounder
 
Join Date: Nov 2011
Location: Fresno
Posts: 165
Default Re: could i run a punk dig on a outcry esc?

If you decase it and flip it over you will find only 2 traces for the motor outputs. Each one has 2 wires (1 color) coming from it. Like Heyok said, it's just to make it easier on us for hooking up.
Sydwall85 is offline   Reply With Quote
Reply



could i run a punk dig on a outcry esc? - Similar Threads
Thread Thread Starter Forum Replies Last Post
punk dig won't run motor 2 out4crawlin Electronics 4 12-24-2010 12:31 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 05:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com