01-03-2013, 10:02 PM | #1 |
Newbie Join Date: Jan 2013 Location: sultan
Posts: 4
| novak m2 dig problems
In need of some help! When I program my m2 dig the third channel seems to work fine but when I have it in 4x4 and turn left it digs front and when I turn right it digs rear! Any help would be much appreciated thanks! Oh Ya this is on a xr10!!!!
|
Sponsored Links | |
01-04-2013, 01:31 PM | #2 |
RCC Addict Join Date: Dec 2006 Location: Oak Ridge, TN
Posts: 1,141
| Re: novak m2 dig problems
Did you use the 3rd channel for a rear steer setup in the past. Sounds like the 3rd channel is slaved to the steering channel somehow. What TX?
|
01-04-2013, 02:41 PM | #3 |
Newbie Join Date: Jan 2013 Location: sultan
Posts: 4
| Re: novak m2 dig problems
It's a spectrum 3c.
|
01-04-2013, 03:03 PM | #4 |
Rock Stacker Join Date: Feb 2012 Location: Espaņa
Posts: 73
| Re: novak m2 dig problems
Hello not be if I explain well through the translator... looks to the issuing credit if you have menu in mixing or st post mix to mix channel 1 with the aux. If you have desconectalos the two. of Anyway, some fellow confirm you a greeting |
01-04-2013, 04:50 PM | #5 | ||
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: Novak M2 dig problems Quote:
Quote:
When I read the 1st post, I was thinking it was a mixing issue. Jason, I would suggest using a different "model" and see if you still have the same issue. What we're all getting at is that the TX may have a "bug" and is trying to do something you're not expecting. PS, I had an M2 dig......didn't do what I wanted, thus sold it. | ||
01-04-2013, 05:18 PM | #6 | |
Rock Stacker Join Date: Feb 2012 Location: Espaņa
Posts: 73
| Re: Novak M2 dig problems Quote:
| |
01-04-2013, 06:43 PM | #7 |
Newbie Join Date: Jan 2013 Location: sultan
Posts: 4
| Re: novak m2 dig problems
Well I figured out that the mixing was turned to sleeping and I programmed it for the dig so it was messed up there! Now I have a bad glitch but not all the time. When I go from front or rear dig to 4x4 it glitches between the two and if I'm spinning tires on a rock face for any amount of time it's like the esp shuts off completely and it either just stalls on the rock or rolls off of it! Thanks for all the help guys and if u have any further ideasfor my troubles they r greatly appreciated! Maybe the m2 is just not for me!!!
|
01-04-2013, 08:49 PM | #8 |
RCC Addict Join Date: Dec 2006 Location: Oak Ridge, TN
Posts: 1,141
| Re: novak m2 dig problems
Are you running a BEC? What servo?
|
01-05-2013, 03:38 PM | #9 |
Newbie Join Date: Jan 2013 Location: sultan
Posts: 4
| Re: novak m2 dig problems
Castle bed and hitec 7955tg steering servo!
|
01-05-2013, 03:49 PM | #10 |
Rock Stacker Join Date: Feb 2012 Location: Espaņa
Posts: 73
| Re: novak m2 dig problems
Hello I had it mounted and worked me well. have the castle bec to 6v series comes to 5.1V think |
novak m2 dig problems - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2x Tekin FX-r with Novak-DIG and DX3R or No dig with FlyskyGT3B | Turbo-s | Axial XR10 | 14 | 02-11-2012 08:16 AM |
Novak The Dig: Dig for Dual Electric Crawler NOV5450 | jmrcardoso | Electronics | 1 | 12-05-2011 04:20 PM |
novak problems | axial goats | Electronics | 18 | 09-27-2009 10:46 PM |
novak problems? | Redronin | Electronics | 6 | 08-26-2008 11:46 AM |
Thread Tools | |
Display Modes | |
| |