|
| LinkBack | Thread Tools | Display Modes |
10-26-2019, 11:54 PM | #1 |
Newbie Join Date: Jul 2019 Location: Malaysia
Posts: 13
| How to reset servo start position?
I bought a new servo and I tried to attach it to my rock crawler. However, when the vehicle turns on, it starts at a wrong angle so the wheels are not straight. Could anyone tell me how to fix this? Thanks, I truly appreciate your help!
|
Sponsored Links | |
10-26-2019, 11:56 PM | #2 |
Quarry Creeper Join Date: May 2019 Location: North Highlands
Posts: 483
| Re: How to reset servo start position?
You need to take the servo horn off and put it back on with the wheels as straight as possible. The rest is done with the radio and the steering trim. What radio are you using?
|
10-26-2019, 11:58 PM | #3 |
Newbie Join Date: Jul 2019 Location: Malaysia
Posts: 13
| Re: How to reset servo start position?
I'll try that now. I'm using a RedCat 3 channel transmitter
|
10-27-2019, 12:03 AM | #4 |
Quarry Creeper Join Date: May 2019 Location: North Highlands
Posts: 483
| Re: How to reset servo start position? I don't know that particular radio, but they all come with trims. You just need to find it (it will probably be marked with an "ST") and keep clicking in the proper direction until your wheels are straight.
|
10-27-2019, 01:03 AM | #5 |
RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,791
| Re: How to reset servo start position?
Wen u take the servo horn off, power the truck on n make sure the radio steering trim is centered. Make sure to have wheels as close to center as possible, then put servo horn back on. Adjust trim from there Sent from my SM-J327VPP using Tapatalk |
How to reset servo start position? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My servo keeps shifting position | fyrstormer | General Crawlers | 13 | 07-05-2016 08:35 PM |
Working on a new servo controller to give you more from your two position channel | heyok | Electronics | 15 | 11-22-2015 12:20 PM |
Position a servo with a toggle switch | heyok | Electronics | 17 | 06-18-2015 10:02 AM |
Servo mounting position on XR10 | DiggyStyle | Axial XR10 | 9 | 02-04-2012 03:35 PM |
2 position 1 way servo, or modified servo? | TxCruzr | Electronics | 13 | 04-18-2008 02:10 PM |
Thread Tools | |
Display Modes | |
| |