01-10-2013, 11:15 AM | #1 |
Newbie Join Date: Jan 2013 Location: syracuse
Posts: 5
| esc?
Does anyone know what a good dual esc and motor combo would be for a 1/8th rig? And about how much and where to get it.
|
Sponsored Links | |
01-10-2013, 12:06 PM | #2 |
Quarry Creeper Join Date: Jan 2013 Location: Benicia/Vallejo
Posts: 490
| Re: esc?
Dual tekin FXR is the way to go. Check out rpp hobby
|
01-10-2013, 12:07 PM | #3 |
Quarry Creeper Join Date: Dec 2012 Location: Spokane Valley
Posts: 386
| Re: esc?
that, or the brxl at holmes hobby.
|
01-10-2013, 12:29 PM | #4 |
Pebble Pounder Join Date: Nov 2008 Location: fresno
Posts: 132
|
Like others have said fxr is nice but I am a fan of castle because I think their brake is better than most Sent from my SCH-I605 using Tapatalk 2 |
01-10-2013, 03:52 PM | #5 |
Newbie Join Date: Jan 2013 Location: syracuse
Posts: 5
| Re: esc?
I looked at both of your suggestions, but is their anything that you would recommend that I would not have to spend $200 on? Cause I still need the motors as well.
|
01-10-2013, 03:57 PM | #6 | |
Pebble Pounder Join Date: Oct 2012 Location: Graham WA
Posts: 184
| Re: esc? Quote:
You could get cheap crap. but noone is gonna recommend it and if you get yourself a star, you could prolly find both ESC's with a BEC for way under 200 in the classifieds | |
01-10-2013, 04:07 PM | #7 |
Newbie Join Date: Jan 2013 Location: syracuse
Posts: 5
| Re: esc?
OK. That is totally understandable, but nothing recommendable that comes with motors? Or would I be able to use the 55t's that I have?
|
01-10-2013, 05:14 PM | #8 |
Pebble Pounder Join Date: Oct 2012 Location: Graham WA
Posts: 184
|
Your motors would be fine. I don't run moa, so idk if that would be the preferred turn, but they will work. Sent from my MB865 using Tapatalk 2 |
01-10-2013, 05:22 PM | #9 |
Pebble Pounder Join Date: Nov 2008 Location: fresno
Posts: 132
|
I run dual 65t in my rig. Top speed is not fast but I have enough torque to brake stuff which I prefer Sent from my SCH-I605 using Tapatalk 2 |
01-10-2013, 11:33 PM | #10 |
Newbie Join Date: Jan 2013 Location: syracuse
Posts: 5
| Re: esc?
OK that's what I was wondering, cause I already have 2 540 motors. But just to let you know I'm only asking questions cause I an new to the crawling thing, all my other cars are built for speed. Thank you for theinformation though.
|
01-11-2013, 04:13 AM | #11 |
Newbie Join Date: Oct 2012 Location: hot springs
Posts: 9
| Re: esc?
im going to be building a honcho kit next week what would be a good esc for it on and motor ot thanks
|
01-11-2013, 04:54 AM | #12 |
Rock Crawler Join Date: May 2012 Location: Australia
Posts: 517
| Re: esc?
Fxrs are rubbish in a 1/8th rig. In a 1/8 you really want the Holmes brxl |
01-11-2013, 07:49 AM | #13 |
Newbie Join Date: Jan 2013 Location: syracuse
Posts: 5
| Re: esc?
What do you guys think about the rc4wd outcry esc https://store.rc4wd.com/mobile/product.asp?itemid=664 |
01-11-2013, 08:20 AM | #14 |
Quarry Creeper Join Date: Dec 2012 Location: Spokane Valley
Posts: 386
| Re: esc?
The outcry is fine, it just isn't programmable. My uncle runs one in his super with no problems.
|
Tags |
esc, motor |
esc? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Which ESC Brake/Reverse Type Setting on my Mamba Max ESC? | b00st3d | Venom Creeper | 3 | 01-24-2010 04:34 PM |
RX pack & ESC, remove the red wire or leave the ESC switch off | BenW | Electronics | 5 | 02-23-2005 06:25 PM |
Thread Tools | |
Display Modes | |
| |