TEKIN ROC 3100KV help

[Pegasix]

just trying to put a good brushless combo together for my twin hammers

ive got a 3100 kv tekin rock at my LHS with my name on it.
i will be running mainly 4s lipos with the occasional 3s

whats the best ESC to get the job done and not burn stuff up

[crawler nut]

Mmp

[mammoth]

The mmp will work but if ya have the cash grab a rx8 it will handle the 4s duty without breaking a sweat!!!

[snydercj7]

Mr. Holmes suggest the Mamba Max Pro for that combination when I asked him. It will handle 6s.

[Ty@Tekin]

Why not just pair it with the RX8? Also, while it is rated for 4S I'd recommend sticking with the 3S, it will be plenty fast, I can assure you that.

[Pegasix]

the only reason i plan to run 4s is i have over a dozed 4s 1300 batteries that fit in the twinhammers battery tray this would eliminate having to purchase a new pile of batteries and give me wild wheel speed for fun hill climbs

[ninja turtle]

Originally Posted by Identity_Crisis

the only reason i plan to run 4s is i have over a dozed 4s 1300 batteries that fit in the twinhammers battery tray this would eliminate having to purchase a new pile of batteries and give me wild wheel speed for fun hill climbs

Make them all 3 cells then you'll have 16 batteries lol

[lowlow]

i have the MMP on tha wraith with the 412roc 3100, and i can assure ya that on the "low" setting its still UNREAL!! I went with the MMP because you can grab a good used one for around 70 buks off ebay if ur patient, and i have castle link, which is a MUST for this set up imo.. have fun! Hope you have plenty of spare parts, cause that set up will def letcha know which parts are weak!

[wrangler]

I have Wraith and have a Roc 412 2300 w a MMP, was told w/ the MMP I would have more options when it comes to crawling.

[Pegasix]

went with an mmp snd the 3100 tekin rock. I was torn on the rx8 and the mmp it came down to which was in stock lol. I have a tekin hotwire for my 3 fxr's and the CC card for my brxl's so it was just a matter of stock. gotta get time nkw to tear this thing down and install and out thru the ringer on the 4hour long KOH trail I made at the local quarry

[Ty@Tekin]

I probably would have went with a 2300kV or even 1800kV for 4S. Hope those batteries have a good discharge rating!

[heinie_21]

4s? I blew the stock spur in 10 mins on 3s.

Sent from my SCH-I535 using Tapatalk 2

[chevotafun]

Originally Posted by heinie_21

4s? I blew the stock spur in 10 mins on 3s.

Sent from my SCH-I535 using Tapatalk 2

Really?
Hammered mine all weekend hard running the roc 3100kv on 3s with no issues other than the sifting servo LOL