Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Novak Goat Esc

Reply
 
LinkBack Thread Tools Display Modes
Old 03-24-2013, 04:57 PM   #1
Newbie
 
Join Date: Mar 2013
Location: Farmington
Posts: 2
Default Novak Goat Esc

So I have a novak goat esc with the 18.5 motor, I just put it in my crawler and now the receiver wont turn on, I'm using an external bec and a Lipo.
Kaddy111 is offline   Reply With Quote
Sponsored Links
Old 03-24-2013, 05:59 PM   #2
I wanna be Dave
 
Join Date: Nov 2010
Location: 07456 N. NJ USofA
Posts: 8,315
Default Re: Novak Goat Esc

Is the external BEC into the RX?
If not, is the red wire from the ESC to the RX still connected??

In general, if you run an external BEC to the RX, you should remove the red wire from the ESC to the RX so you don't have 2 BEC's powering the same device.

You still need something powering the RX, either the ESC or the external BEC.
Charlie-III is offline   Reply With Quote
Reply



Novak Goat Esc - Similar Threads
Thread Thread Starter Forum Replies Last Post
Novak Goat 3S ESC THE PARTS GUY Vendors Market 1 06-03-2010 02:34 PM
Novak GOAT ESC only works with Novak BL-Motors? True? spiderschwein Electronics 6 09-01-2008 04:11 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com