| |
03-24-2013, 04:57 PM
| #1 |
| Newbie Join Date: Mar 2013 Location: Farmington
Posts: 2
|  Novak Goat Esc
So I have a novak goat esc with the 18.5 motor, I just put it in my crawler and now the receiver wont turn on, I'm using an external bec and a Lipo.
|
|  |
| Sponsored Links | |
| | |
|
03-24-2013, 05:59 PM
| #2 |
| I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: Novak Goat Esc
Is the external BEC into the RX? If not, is the red wire from the ESC to the RX still connected?? In general, if you run an external BEC to the RX, you should remove the red wire from the ESC to the RX so you don't have 2 BEC's powering the same device. You still need something powering the RX, either the ESC or the external BEC. |
|
| |
 |
Novak Goat Esc - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Novak Goat 3S ESC | THE PARTS GUY | Vendors Market | 1 | 06-03-2010 02:34 PM |
| Novak GOAT ESC only works with Novak BL-Motors? True? | spiderschwein | Electronics | 6 | 09-01-2008 04:11 PM |
| |
Linear Mode
