Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: 7950 Bec voltage

Reply
 
LinkBack Thread Tools Display Modes
Old 05-04-2013, 03:33 PM   #1
Rock Stacker
 
Join Date: Feb 2012
Location: Pittsburgh
Posts: 71
Default 7950 Bec voltage

My wraith kit and parts will be here soon and I am trying to prepare. I have my cc Bec and link already. So I thought I would pre program it to be ready. I have a 7950 on the way. I just want to know what voltage to set at. Will be running 3s. I am thinking 7.4v. Does that sound about right?
Dfl4000 is offline   Reply With Quote
Sponsored Links
Old 05-04-2013, 03:37 PM   #2
Rock Crawler
 
Join Date: May 2009
Location: Hillsboro, OR / Kapolei, Hi
Posts: 695
Default Re: 7950 Bec voltage

Should be good. I run mine at 7V and it never gets hot. I run a 1.9 scaler thats weighs in at about 7lbs.
808DA6 is offline   Reply With Quote
Old 05-04-2013, 04:48 PM   #3
RCC Addict
 
Join Date: Sep 2011
Location: Beavercreek, Oregon, USA
Posts: 1,950
Default Re: 7950 Bec voltage

I run my 7950 at 7.4 volts and it works fine and no heat problems.
k7zpj is offline   Reply With Quote
Old 05-04-2013, 04:53 PM   #4
RCC Addict
 
Join Date: Apr 2009
Location: Token's life matters
Posts: 1,836
Default Re: 7950 Bec voltage

With the overload turned on i run all my hitec hv servos at 9 volts on my comp rigs and 8.2 on the rest . Under heavy use they warm up but i have 10plus and have yet to have one fail electrically.
The Violator is offline   Reply With Quote
Old 05-04-2013, 05:08 PM   #5
Rock Stacker
 
Join Date: Feb 2012
Location: Pittsburgh
Posts: 71
Default Re: 7950 Bec voltage

Cool, thanks. I definitely didn't want to undervolt, so I thought 7.4 was good. I'm pretty sure that will be plenty powerful enough for some crawlin and little bashing. I can't wait for this thing to come. Mmp, 3300, all RR plus sh#tload of other stuff. This is my first crawler. We'll any rc for that matter in over 20 years. Like a kid again!
Dfl4000 is offline   Reply With Quote
Reply



7950 Bec voltage - Similar Threads
Thread Thread Starter Forum Replies Last Post
BEC Voltage Orph3o Electronics 3 10-25-2012 10:53 PM
HiTec 7954 w/ BEC or 7950 off a lipo? Arctic Fire Electronics 22 04-06-2012 07:13 AM
BEC with Futaba receiver and Hitec 7950 Draggermirage Electronics 13 01-04-2012 06:48 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com