RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Please help!! LNC ESC AND MOTOR (http://www.rccrawler.com/forum/electronics/444073-please-help-lnc-esc-motor.html)

LNC_7 05-10-2013 05:31 PM

Please help!! LNC ESC AND MOTOR
 
Hello, Can i get some quick help of what to do, i have a Losi Night Crawler and got a new motor, titan 55 21t, and the 2 plug in cords wont fit to connect. i know there are other people who have a lnc and use this motor, but how. Do i need to sauter longer ones on the motor or what? Thanks. (btw i am new to this website so if i did something wrong my bad)

jeepster73 05-10-2013 05:34 PM

What do you mean by wont fit?

If they are too short then you will have to SOLDER new leads!

1r3land 05-10-2013 06:48 PM

Well if they are to short you will have to replace them with longer ones and re solder them to motor, I assume that's what u mean...
Not hard to do!
If you aren't comfortable with soldering I'm sure your LHS will do it for u for a small fee or maybe even free. Very simple to do!
Good luck!

thomass14 05-10-2013 07:33 PM

Re: Please help!! LNC ESC AND MOTOR
 
solder the connectors off of the old motor to the new motor. or it could be a good time to step up to deans plugs

LNC_7 05-10-2013 07:59 PM

Re: Please help!! LNC ESC AND MOTOR
 
I justt finished soldering them and it worked fine., thanks guys "thumbsup"


All times are GMT -6. The time now is 02:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com