|
| LinkBack | Thread Tools | Display Modes |
06-21-2013, 10:52 PM | #1 |
Rock Crawler Join Date: Nov 2011 Location: Omaha, Nebraska
Posts: 768
| how do you install cc bullet connectors
I just recently picked up a brushless motor that needs bullet connectors I have some on the way but my question is how exactly do I attach them to the motor wires? Every motor I've ever bought off here had them already installed so I've never done it myself. Thanks, Kenneth |
Sponsored Links | |
06-21-2013, 10:58 PM | #2 |
Quarry Creeper Join Date: Feb 2008 Location: stockton
Posts: 394
| Re: how do you install cc bullet connectors
I'm sure a quick search on YouTube would show you.
|
06-22-2013, 01:12 AM | #3 |
Pebble Pounder Join Date: Feb 2009 Location: wilkeson
Posts: 129
|
Fill the shallow end up with solder and stick the wire in. Pretty simple.
|
07-30-2013, 08:46 AM | #4 |
Quarry Creeper Join Date: Apr 2013 Location: perkasie
Posts: 276
| Re: how do you install cc bullet connectors
cover the tip of the wire with solder get one of those holders from radio shack with the clips to hold the wire heat the connector up with the wire in it and melt more solder into that little hole thats in the connector...then heat shrink the lower part....done
|
07-30-2013, 08:55 AM | #5 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: how do you install cc bullet connectors
I tried bubble gum once but it didn't work out very well. Solder is the way to go. I tin the wire (heavy solder) and then stick it in the hole. and then hold the solder up to the wire/hole and let it flow to the hole fills up. |
07-30-2013, 10:30 AM | #6 |
RCC Addict Join Date: Sep 2011 Location: Beavercreek, Oregon, USA
Posts: 1,950
| Re: how do you install cc bullet connectors
I drill a hole in a 2x4 to make a jig to hold the bullet connector. 1) Tin the wire. 2) Fill the bullet connector with solder and then put the wire into the bullet connector/molten solder. Take the heat way and then let it cool down. 3)After it is cool then put on the heat shrink. Here is video: How to Solder Bullet Connectors to Brushless Motors and ESC - YouTube http://www.youtube.com/watch?v=B9yY9Kk4bEAhttp:// Last edited by k7zpj; 07-30-2013 at 10:34 AM. |
how do you install cc bullet connectors - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bullet connectors or? | Fattymojo | Newbie General | 5 | 07-05-2010 10:27 AM |
Bullet connectors where to buy? | norbyx | Electronics | 3 | 05-22-2010 08:33 AM |
Bullet motor connectors. | chevy42083 | Electronics | 2 | 10-01-2007 06:45 PM |
Thread Tools | |
Display Modes | |
| |