Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Airtronics M8 conversion Help

Reply
 
LinkBack Thread Tools Display Modes
Old 07-19-2013, 03:36 PM   #1
Newbie
 
Join Date: Dec 2012
Location: Clark County
Posts: 11
Default Airtronics M8 conversion Help

Any of you guys know anything about the Airtronics M8 TX. I found some info on upgrading them to the 2.4 system but I am not sure where to get the parts or what receivers I can use with it. Any info would be a big help.
Duce8281 is offline   Reply With Quote
Sponsored Links
Old 07-20-2013, 12:49 AM   #2
RCC Addict
 
Join Date: Mar 2007
Location: Turn the mayflower around.. it will never work
Posts: 1,588
Default Re: Airtronics M8 conversion Help

You are converting a fm radio to 2.4...... You are adding a module to the radio being 2.4 dsss and will need to use 2.4 dsss rx. This is the same for m8 and m11 tx. Just an fyi there is a slight delay from signal..... You can tell if you run really fast onroad. If not you may not notice. I did with m11 long ago.....

Airtronics Module - M11/ M8 Tx 2.4GHz DSSS
JokersWild is offline   Reply With Quote
Reply



Airtronics M8 conversion Help - Similar Threads
Thread Thread Starter Forum Replies Last Post
Airtronics MX-3 robert97dodge Electronics 6 07-19-2008 09:00 PM
WK Crawler Conversion - 5 Step/HPI Conversion Hybrid birdie HPI Wheely King 12 10-28-2007 11:22 PM
Airtronics mx3 4ws conversion? Lucus Electronics 6 01-11-2007 04:23 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com