08-02-2013, 02:35 PM | #1 |
Quarry Creeper Join Date: Apr 2011 Location: bay area
Posts: 214
| 2 motors 1 esc?
So I know Novak has an esc that can power two motors but can a tekin for do the same? Or any other esc that can do it? I will be using a cc bec to power the servos directly to take the load off the esc Sent from my VS930 4G using Tapatalk 2 |
Sponsored Links | |
08-02-2013, 02:52 PM | #2 |
I wanna be Dave Join Date: Jul 2009 Location: Rancho Relaxo. California. USA. Earth.
Posts: 3,292
|
Any esc can, as long as you don't go over the motor turn limit of the esc.
|
08-02-2013, 03:30 PM | #3 |
Quarry Creeper Join Date: Apr 2011 Location: bay area
Posts: 214
|
Thanks for the info Sent from my VS930 4G using Tapatalk 2 |
08-02-2013, 08:00 PM | #4 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: 2 motors 1 esc?
What Novak?? I would NOT recommend the M2 dig. Sounds good on paper, not so good in application (from what I tried/observed). As to "turn limits", if it states "35T minimum", then you are likely stuck with 2 ~70T motors to stay close to what the ESC can handle on a single ESC. Are you running a MOA or 2 motors on a single motor plate on a trans? For a MOA, a servo dig & single ESC is "workable", dual ESC's and a radio that can do mixing is best. I have used both. |
08-02-2013, 10:55 PM | #5 |
Quarry Creeper Join Date: Apr 2011 Location: bay area
Posts: 214
|
Ya I'm not too fond of Novak. Its for a moa and I do have a hacked gt3b that ice used for a xr10 before with dig and 4ws but I'm trying to keep cost down. I've used fxrs and I really like em so I just wanted to get one but I know two would be the best way to go Sent from my VS930 4G using Tapatalk 2 |
08-02-2013, 11:16 PM | #6 | |
RCC Addict Join Date: Aug 2011 Location: Elkhart
Posts: 922
| Quote:
X2 on the Novak.. Just stay away from the m2 and save the headaches and stress! | |
2 motors 1 esc? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
motors and esc | thor_woody | Axial XR10 | 30 | 04-01-2011 03:37 PM |
What ESC and motors? | tintmaster | Newbie General | 6 | 09-08-2010 06:16 PM |
1 ESC, 2 Motors ? | liketocrawl | Electronics | 9 | 05-19-2010 09:08 PM |
Has anyone tried these esc and motors | NOLA RIDER | Venom Creeper | 3 | 12-30-2009 07:36 PM |
the best motors and esc | onetuffcrawler | Newbie General | 3 | 01-28-2007 11:30 PM |
Thread Tools | |
Display Modes | |
| |