weird glitch setup: sv2 with a cc bec intergy 19turn airtronics 94358 servo 2200 3s gtb3 here is the issues i popped the postive cable of the motor while running resolder it on hooked up the battery and all chimes go off normally. but if i throttle and turning its glitches like crazy. jumping forward real jerking in reverse. i have ran this setup just fine for the last few weeks and it ran super before busting the solder loose. i cant see any exposed wires and i havent touch anything else. what could this be? is the motor to blame? im lost please help |
Re: weird glitch Small short between motor wire & case? Cold motor wire solder joint? Solder/rosen junk in brush hood (make sure both brushes move freely). If nothing else, try recalibrating the ESC to the RX.8) |
Re: weird glitch word! i ll will give that a try when this damn heat relaxes thanks |
All times are GMT -6. The time now is 07:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com