|
| LinkBack | Thread Tools | Display Modes |
09-20-2013, 01:26 AM | #1 |
Rock Stacker Join Date: Feb 2013 Location: Comstock NY
Posts: 54
| RC4WD Rocker Dig II Help !!!
Just put my Bully together with Holmes Motors , Holmes ESC with a CC BEC and a Traxxas Summit 5 Channel remote with docking station. I finally put everything together and i can not get the RC4WD Rocker dig to work right. The problem i am having is i can not get both motors to work at the same time. I can get the rear to lock with power to the front or the front locked with power to the rear. Is this possibly a defective unit ? it is brand new is there possible something i am missing ? This is my first time using one thanks |
Sponsored Links | |
09-20-2013, 02:13 AM | #2 |
RCC Addict Join Date: Dec 2011 Location: Australia Queensland!
Posts: 1,086
| Re: RC4WD Rocker Dig II Help !!!
The traxxas radio is only a 2 position switch if you haven't modded it. You need a 3 position switch radio to run the dig properly. Though I thought you would have all turning and only either front or back locked.
|
09-20-2013, 09:03 AM | #3 |
I wanna be Dave Join Date: May 2007 Location: Vancouver, BC
Posts: 2,376
| Re: RC4WD Rocker Dig II Help !!!
If you aren't going to modify your transmitter to have a three position channel, this can help... I make a controller that will let you have all the dig modes using your two position channel: MOA Dig Controller for Two Position Channel |
09-20-2013, 11:08 AM | #4 |
Rock Stacker Join Date: Feb 2013 Location: Comstock NY
Posts: 54
| Re: RC4WD Rocker Dig II Help !!!
There is a 3 position toggle switch for locking the diffs on the summit on the remote. If it needs to be modded any idea what I need todo ? Here is a pic of the remote |
09-20-2013, 01:32 PM | #5 |
Rock Stacker Join Date: Feb 2013 Location: Comstock NY
Posts: 54
| Re: RC4WD Rocker Dig II Help !!!
Just figured it out. Pulled the remote apart and swapped some wires around and the bully is in action. Thanks for the help Here is what I did. First pic is what the wires look like from TRAXXAS. Need unsolder all 6 wires and solder them into the order in the 2nd pic. You then need to put the dig into channel 3. Any questions just pm |
RC4WD Rocker Dig II Help !!! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rc4wd rocker dig | rccrawler66 | Electronics | 1 | 10-14-2010 07:56 PM |
Rc4wd rocker dig ??'s | Tklan Crawler | Electronics | 6 | 08-17-2010 06:42 PM |
Thread Tools | |
Display Modes | |
| |