HiTec 7955 won't quiet down I just installed a HiTec 7955 servo and a CC 10amp BEC. The servo is acting like it can't find zero and is making noise. I've played with the trim adjustments on the transmitter and it doesn't help. There is no noticeable chatter of the steering. I then disconnected the BEC from the receiver,reinstalled the red wire to the ESC to receiver connector and that didn't solve the problem either. I'm running a HH BRXL, a 3 cell lipo, and the Axial receiver. Any ideas? |
Re: HiTec 7955 won't quiet down Its a digital servo, perfectly normal behavior, its going to always be trying to find center, If you lift the wheels off the ground it should stop buzzing. |
Re: HiTec 7955 won't quiet down Quote:
|
Re: HiTec 7955 won't quiet down Quote:
mmmmmmmmm waffles!!! I love waffles |
Re: HiTec 7955 won't quiet down Try a Savox digital if you think the HiTec is noisy. |
Re: HiTec 7955 won't quiet down Quote:
X2 I have a couple and they tend to be noisy at times, nothing to worry about "thumbsup" |
Re: HiTec 7955 won't quiet down with everything I've read here about digital servo's, I don't remember anyone complaining or even mentioning the noise they make. |
Re: HiTec 7955 won't quiet down I've got two7950s and eight 7954s and they all make the clicking noise sometimes. |
All times are GMT -6. The time now is 10:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com