axial esc heat sink came off
 

can i ca glue it back on or do i need some kinda special glue? thanks

Re: axial esc heat sink came off
 

Nope, you need something that is a thermal conductor and isn't an electrical conductor. This is the best stuff: Arctic Silver Arctic Alumina 5g Thermal Adhesive Set AATA-5G - Newegg.com

Re: axial esc heat sink came off
 

ok great thanks

Re: axial esc heat sink came off
 

while you have it apart, put the heatsink back on and might as well slap it in some plasti-dip and waterproof it :P

Re: axial esc heat sink came off
 

Or instead of making it water resistant with plastidip he could really do it right and waterproof it with conformal coating. :ror:

Re: axial esc heat sink came off
 

you can buy heatsink compound at any bestbuy or FRY's.

Re: axial esc heat sink came off
 

what conformal coating are you using? this maybe

MG Chemicals 4223 Urethane Conformal Coating: Amazon.com: Industrial & Scientific

Re: axial esc heat sink came off
 

I replied to your pm but I will add the info here as well.

What I use:
Conformal coating - MG Chemicals 419b
Conformal coating stripper - MG Chemicals 8310 (if you need to solder on a board you already coated)

Both are available on ebay and amazon.