To much power....?
 

So I'm rebuilding my mud truck this winter. I was running a HH brxl and 7t puller, at our first group mud run I was the only one running brushed. Everyone was running brushless (vxl,vanguard,Novak) I had a thought today at work about running a dual motor plate with dual vxl. Think it's to much?
I've already go full RRP gears, MIPS, gen3 slipper, HD gears, vanquish trans case

Re: To much power....?
 

ur vxl will giv before that stuff and fyi

never too much power 8)

Re: To much power....?
 

True, if one vxl goes at least I'll have one still running

Re: To much power....?
 

you crazy.... :lmao:

Re: To much power....?
 

Maybe a little bit, one of those ideas where your like whatever I'll do it

Never too much power, just not enough skill.

Re: To much power....?
 

pro4 and water proof an mmp

Re: To much power....?
 

This is what I was thinking of doing in my mud truck 1400kv pro4 and an mmp on 6s

Re: To much power....?
 

Oh and there's a saying that relates to this but is for 1:1 trucks, "there's no replacement for displacement" you can never have to much power, just weak parts and a lead foot/finger

Pro4 HD 4300kv on 3s. Gear down and you will have torque that can't be stopped

Just run a t8 and have no more problems with too little power.

What is the frame, and transmission. Thats the limiting factor on motors. That and your wallet :ror:

Re: To much power....?
 

Try duel HH puller motors. I think that you should be good then...:roll:

Re: To much power....?
 

Doubling up is silly when you can step up to one mamba monster with a 2200 on minimum 3s and wipe those vxl's off the map.

And make sure to run a truggy motor. Lol

Re: To much power....?
 

Well already having one vxl is why I thought of it, I've wanted to get a MMP and pro4 just waiting on the funds, I want something that's just gonna chew and spit their trucks up

Re: To much power....?
 

Then save ur money and buy an mmp and pro4 3300kv or bigger. I had this in my trail truck at over 8lbs with 1.9's and could go anywhere the guys with 2.2s made it

Re: To much power....?
 

The mmp is great but if you really want to get it on run that motor off of an rx8. In simple terms the rx8 puts out more amperage therefore mo' power. :D

Re: To much power....?
 

What are you talking about? Esc's don't "put out" amps.

Re: To much power....?
 

The esc's are rated in amperage output. From some quick digging I've found that the MMP is 100 continuous and the rx8 II is 220 amp continuous. Perhaps my terminology is off but sit sure smells like I'm right.