tatra 8x8 motor esc combo questions Hey lads I'm looking for some advice! Got a new build coming - 1/10 tatra 8x8 and I'd like your opinions on what esc-motor combo would be best for me.I have a brushed 35t honcho with mtronics tio esc which I've never had an issue with.for the tatra though I wouldn't mind something a bit more special. 1-it's going to have to be very torquey to spin 8 wheels 2-I'd like it to be faster than the honcho. 3-I don't mind going brushless if I could waterproof it. 4-I don't really want to spend more than 150 but I would if it made a big difference. So guys what would be your choice of power plant and why. Thanks in advance for any advice |
Re: tatra 8x8 motor esc combo questions I am running this 540 Brushless Sensored Outrunner from Holmes Hobbies on my 15lbs CXT rig on 3s. Geared 10:1 it easily handles this rig. Ran it for 45 minutes on the G6 trial and it was barely warm to the touch. Lowend control is great and if you wanna get crazy with the wheelspeed just gear it up a little. Holmes Hobbies LLC http://www.rccrawler.com/forum/axial...ml#post4499770 Edit. I run it on a Mamba Max Pro ESC. ... |
Re: tatra 8x8 motor esc combo questions I would think that a HH torqumaster pro custom with the following: 45t 5mm web 10mm comm Two mag FB12 Checkpoint brushes Highest fill wire And runit on a HH BRXL - you will have all the torque you need, and if you want it faster just increase your S - start at 3S and watch temps. :) |
Re: tatra 8x8 motor esc combo questions i think you have a lot of options. i had a novak goat 3s with 18.5t brushless combo on hand and i've been running that in my 6x6 (which probably weighs in around 10-12lbs) with no issues. i'm using 2s lipos and it gets good runtime, is pretty quick and runs cool. |
Re: tatra 8x8 motor esc combo questions thanks szczebra ill look into it ,its an option anyway.just had a look at your truck vid there where it mashed the slipper and it seems plenty fast for what i need |
Re: tatra 8x8 motor esc combo questions thanks 94c,ive emailed holmes hobbies for recommendations |
Re: tatra 8x8 motor esc combo questions jebster are you ever lacking torque or speed with the goat setup? |
Re: tatra 8x8 motor esc combo questions Quote:
|
Re: tatra 8x8 motor esc combo questions I've ran that setup - sold it pretty quick. To each their own - but read reviews on Novak here - MUCH more way negative than positive. Read the same on HH or a Tekin Pro4 - exact opposite. My experience - Novak is not good. I would recommend the Tekin Pro 4 if you want to go brushless with a MMP - but I would strongly advise you to stay away from Novak - will not spend my hard earned money on their product again (in crawlers/scalers at least). |
All times are GMT -6. The time now is 09:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com