|
| LinkBack | Thread Tools | Display Modes |
01-08-2014, 09:42 PM | #1 |
Pebble Pounder Join Date: Jan 2009 Location: Yacolt, wa
Posts: 147
| Turnigy tgy-5521MDHV servo |
Sponsored Links | |
01-08-2014, 10:02 PM | #2 |
I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA
Posts: 4,831
| Re: Turnigy tgy-5521MDHV servo
Do those philips headed screws actually go into the body of the servo or are they short and just screw into the top like on the solar 772. |
01-08-2014, 10:30 PM | #3 |
Pebble Pounder Join Date: Jan 2009 Location: Yacolt, wa
Posts: 147
| Re: Turnigy tgy-5521MDHV servo
haven't taken it apart to find out
|
01-08-2014, 10:52 PM | #4 |
I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA
Posts: 4,831
| Re: Turnigy tgy-5521MDHV servo |
01-09-2014, 06:53 AM | #5 |
Pebble Pounder Join Date: Dec 2013 Location: brockville
Posts: 158
|
What's the height of it if you don't mind checking :-)
|
01-09-2014, 10:49 AM | #6 |
Pebble Pounder Join Date: Jan 2009 Location: Yacolt, wa
Posts: 147
| Re: Turnigy tgy-5521MDHV servo
Model: TGY-5521MDHV Dead band: 2us Working frequency: 1520us / 330Hz Operating voltage: 6.0~8.4V Operating speed (6.0V): 0.13sec/60° Operating speed (7.4V): 0.11sec/60° Stall torque (6.0V): 21.45kg.cm (297.94 oz/in) Stall torque (7.4V): 24.35kg.cm (338.22 oz/in) Connector wire length: 265mm Dimensions: 40.5x20.2x42mm Weight: 60g |
Turnigy tgy-5521MDHV servo - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Turnigy Servo | Super | Electronics | 41 | 06-01-2014 06:38 AM |
Turnigy mg959 servo?? | savagebeast | Electronics | 0 | 02-05-2012 01:08 PM |
Turnigy servo? | Tklan Crawler | Electronics | 2 | 11-29-2010 09:32 PM |
Turnigy servo | stona | Electronics | 2 | 01-18-2010 01:12 PM |
Turnigy Servo??? | THnCS | Electronics | 8 | 09-22-2009 10:57 AM |
Thread Tools | |
Display Modes | |
| |