moter wont run after CC BEC removal for dig I just got the dig kit for my scx-10 and putting it together realized I would need the ch 3 slot my BEC was plugged into, so I took it out of the mix reconnected the red wire and plugged in the battery. Both servos 1 and 3 work but no motor. Lights go ch 2 I assumed. I could get rid of my lights and put my BEC back but would rather not loose them if it can be helped, using the fs-gt3b and receiver. Somebody please help me! |
Re: moter wont run after CC BEC removal for dig You need the BEC. Use the bind port on the rx to plug the bec into. |
Re: moter wont run after CC BEC removal for dig How do I not have the dig servo on the trigger when bec is in the bind port? |
Re: moter wont run after CC BEC removal for dig Your Receiver should have an extra slot for the BEC to plug into. What TX/RX are you using? |
Re: moter wont run after CC BEC removal for dig Quote:
ESC to CH2 Dig to CH3 BEC to Bind or BATT (remove the red wire from the ESC's plug) It would help to know what you have for a receiver and dig controller, but the above should get you most of the way there. |
Re: moter wont run after CC BEC removal for dig Fly sky gt3b with fly sky 3ch receiver. Reading heyoks post I have the esc and bec ports wrong (dumbass) Rodger switching!! |
Re: moter wont run after CC BEC removal for dig Are you working now? |
Re: moter wont run after CC BEC removal for dig Receiver only has 4 ports, guess I need a new receiver to run my lights |
Re: moter wont run after CC BEC removal for dig In about 10 minutes I will be |
Re: moter wont run after CC BEC removal for dig There is a thing called a Y cable. You plug it into any receiver port and it gives you two ports. If the lights only need power, that's a way to do it. |
Re: moter wont run after CC BEC removal for dig Oh perfect I guess T hobbies has it? |
Re: moter wont run after CC BEC removal for dig It's working! Just putting everything back together now might be awhile I'll post some pics after |
http://img.tapatalk.com/d/14/01/12/e6yzudu9.jpghttp://img.tapatalk.com/d/14/01/12/3eqevasu.jpg Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 06:48 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com