Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Mamba Max Pro Question

Reply
 
LinkBack Thread Tools Display Modes
Old 01-21-2014, 09:02 PM   #1
I wanna be Dave
 
Join Date: Mar 2013
Location: Minden
Posts: 2,198
Default Mamba Max Pro Question

can some please tell the size of the bullet connectors on wires of the MMP going to the motor the A,B,C wires.

does the size of the bullets connectors determine the gauge of wire you can use, I want to use 12 gauge wire,

but not sure what size of connectors is needed and if they match the esc,

I do not want to cut the esc wires any shorter, if I can help it, and where can I order gold plated solder on connects to make disconnect leads from the esc to the motor.

thank you

Last edited by kgb424; 08-07-2014 at 08:49 PM.
kgb424 is offline   Reply With Quote
Sponsored Links
Old 01-21-2014, 09:07 PM   #2
Pebble Pounder
 
Join Date: Feb 2013
Location: Fresno
Posts: 197
Default Re: Mamba Max Pro Question

4mm come on the MMP from the factory, you can change them over to the 5.5 castle bullets for 12guage and thicker wire.
4mm bullets are rated to 13guage no thicker.

Although I would try and just get the wire in there. It's possible.

Links are only examples I would check around for your best prices.

Castle Creations 4mm High Current Bullet Connector Set [CSE095-0007-00] | Electric Accessories - A Main Hobbies

Castle Creations 5.5mm High Current Bullet Connector Set [CSE095-0008-00] | Electric Accessories - A Main Hobbies
BuhBoombuh is offline   Reply With Quote
Old 01-21-2014, 10:39 PM   #3
I wanna be Dave
 
Join Date: Mar 2013
Location: Minden
Posts: 2,198
Default Re: Mamba Max Pro Question

thank you I bought the Castle 4mm bullet connector sets, comes with three males and three female connectors and I bought a shrink tubing assortment and some red, white, black, 13 AWG wire, cause I'm not cutting them esc wires, I'm going to make disconnect leads from esc to motor and wanted use the same gauge as the factory.
kgb424 is offline   Reply With Quote
Old 01-21-2014, 10:42 PM   #4
Pebble Pounder
 
Join Date: Feb 2013
Location: Fresno
Posts: 197
Default Re: Mamba Max Pro Question

Yep just use 13 guage like whats on the esc and your good to go.
BuhBoombuh is offline   Reply With Quote
Reply



Mamba Max Pro Question - Similar Threads
Thread Thread Starter Forum Replies Last Post
Help please Mamba max pro question Quartermaster Electronics 3 09-30-2013 11:39 PM
mamba max pro question Dr.Newb Electronics 12 07-13-2013 11:00 AM
mamba max pro question Boids Electronics 13 04-30-2010 07:48 AM
Mamba Max Pro question wrightcs77 Electronics 4 01-23-2010 10:00 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com