| |
01-23-2014, 08:07 PM
| #1 |
| Quarry Creeper Join Date: Jun 2011 Location: panama city
Posts: 296
|  RsGen 2 problem. help
I had a glitching problem. seems the truck would stall and then come back. so i changed the sensor wire to a new one, a friend of mine thought maybe a bad on/off switch. so i removed and wired together. I re calibrated the esc to the Tx and it recognizes the forward and then backwards with the blinks and tones. after the rear calibration tones go off the esc starts blinking three lights and , no response from the TX. steering works but nothing for power from the motor. tried different tx/rx ..samething, tried another sensor wire (new also) notta Im lost.. would it be the cap? doesnt look or smell but... thanks ahead for any input. |
|  |
| Sponsored Links | |
| | |
 |
RsGen 2 problem. help - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with Tekin RS system in my LCC, will a BEC fix my problem? | rcboy514 | Electronics | 3 | 01-12-2012 05:55 PM |
| Tekin Problem or Radio Problem? | Harvo | Electronics | 8 | 07-30-2010 06:02 AM |
| Little bit of a problem, Possibly big problem... | C_Money | Electronics | 11 | 03-08-2010 05:49 PM |
| Charger problem or power problem? | Rockfrog | Electronics | 4 | 10-09-2009 01:10 PM |
| * Problem * Clicking Problem on my 1/18th | clodman | General Crawlers | 6 | 04-08-2006 08:40 AM |
| |
Linear Mode
