Servo to operate a dig If the servo is mounted on top of the "gear box" of the dig mechanism, am I wrong in thinking that you don't need much of a servo to operate a dig. I am thinking small, light and CHEAP! Any suggestions? |
Re: Servo to operate a dig it does take a bit of torque to operate a dig but... its all in the settings!! you can smoke a servo fast if its set high. |
Re: Servo to operate a dig Quote:
I see most people with a dig on the AX10 run a full sized servo (I have no experience, so don't take that as gospel), but the Losi is designed to work with a smaller servo. I have had great success with the MSX12 Digital Mini Servo. |
AX10 / Wraith |
All times are GMT -6. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com