Airtronics MT-4 and a winch? Im looking at other radios and wanted to know is anybody is running a MT-4 with a winch, Does it have a true three channel aux channel? Not like the DX4c, the half way to do a 3 position channel. Thanks |
Re: Airtronics MT-4 and a winch? I run the MT4S and Yes it has an adjustable 3rd and 4th. I have my servo winch on the lever and switches running from my 4th channel. I have a 3 position dig operating on my third channel. Flawless. |
Re: Airtronics MT-4 and a winch? Quote:
|
Re: Airtronics MT-4 and a winch? I went a little overboard and set up the telementry on my scaler also. I have on board heat sensors for my motor, esc, I calibrated and mounted the speed sensor and hooked up the motor battery. It reads 2, 3 and 4 cell all this on a backlit screen. Amazing. Ya, it can do way more than control a few servos dude. "thumbsup" |
Re: Airtronics MT-4 and a winch? I have an M12 but I'm pretty sure the features are the same. My radio can do 3 position on the 3rd and 4th channel (up to 5 position actually). I use one of the switches on the handle as the winch control on my truck. If you use a ESC as your winch controller, you can use the lever and have proportional speed winch control. |
Re: Airtronics MT-4 and a winch? Love my MT-4!!! It can do Anything! ;) Pro rig for dig/burn/motor mixing, on the lever.. TF2 for shift servo, on the lever... Scx had winch on the lever, then moved it to the button and put 4ws on the lever.. I'm back to the winch on the lever.. (No more 4ws).. Feels Great in hand and has a voltage alarm for running 2s lipo. |
Re: Airtronics MT-4 and a winch? dx4c does have three position switch type option, for both aux channels, i use it for my winch and other stuff. |
All times are GMT -6. The time now is 09:54 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com