11-15-2014, 05:51 AM | #1 |
Newbie Join Date: Feb 2014 Location: kinnelon
Posts: 14
| 3s crawler esc hi all, i was wondering does anyone know of a relatively cheap esc for my scx10 with lipo cutoff and can handle 3s without problems. it has to brushed esc also. I have read that you can get a couple 3s packs out of an ae2 esc but thats not what i want. any help is appreciated. |
Sponsored Links | |
11-15-2014, 07:15 AM | #2 |
Quarry Creeper Join Date: Dec 2009 Location: West Alabama
Posts: 420
| Re: 3s crawler esc
castle sidewinder V3 and add a castle 10amp bec to it. both under $100
|
11-15-2014, 10:17 AM | #3 |
Proverbial threadkiller Join Date: Feb 2011 Location: Central Wisconsin
Posts: 1,453
| Re: 3s crawler esc
I have the AE-2 and a 30 turn Intensity in JUNKFOOT and (with a BEC) it works fine. The Poison Dart and the CUCV both run Castle Sidewinder Micro ESCs (also with BECs) and 35 turn motors in both, works fine, no problem. Lower your gearing, though. JUNKFOOT runs 16/87 (48 pitch) and 1.9 tires/wheels. The tires on this one are extremely short, could probably use a li'l more gear. The CUCV runs 14/87 (48p) with 1.9 t&w. The Poison Dart runs 14/87 (48p) with 2.2 t&w, and an over-driven front axle. The only batteries I have for the crawlers are all 3S/1300mAh/30c and 35c. What motor, gearing, and tires are you running now? More of a trail truck, or more crawling than trailing? . |
11-18-2014, 01:31 AM | #4 |
I joined the Band! Join Date: Sep 2014 Location: USA
Posts: 147
| Re: 3s crawler esc
Hobbywing QUICRUN-8BL150A
|
Tags |
3cell, crawler, cutoff, esc's, lipo |
| |