mt 4 raido looking at a new raido how are the i got 3 cars a b 5 5tm and yeti xl kit now what car to put it in? my old raido is a dex 3 c its like 6 years old |
Re: mt 4 raido |
Re: mt 4 raido is this a good raido? |
Re: mt 4 raido Yes, it is quite a good radio, but I can't for the life of me figure out what you are trying to say in your first post. |
Re: mt 4 raido Mt4 for the win!... |
Re: mt 4 raido What he^ said. |
Re: mt 4 raido What is the end point number for steering I'm debating on it but worried bout that my 4pl went to a 120 my dx4c goes to 150 |
Re: mt 4 raido MT4 best are the rado money for the |
Re: mt 4 raido What he said ^ (kinda) |
Re: mt 4 raido MT-4 here as well! Running 1.9, 2.2s, 2.2p, super(soon), TF2, scx, Sexo(wraith), and a yeti. All end points on the MT-4 are 150% and I haven't found a setup that the MT-4 can't handle! |
Re: mt 4 raido Thanks for that info bro |
Re: mt 4 raido Just got the MT-4s. Running 4ws and dig on a wraith so the rear thumb lever is great for the rear steer. |
Re: mt 4 raido I love my MT4S |
Re: mt 4 raido Looking for a new radio myself. With the MT-4, can you assign one channel to two different switches? Currently using a DX3R for my scaler. I have the winch controlled from two different switches, one is a three position linear control that allows in, out and stop control and the ability to control the speed of the winch, the other is a momentary push button that stops the winch if it is moving, and if the winch isn't moving, hitting it will pay the winch out at full speed. Can the MT4 allow me to do the same thing? Also, trying to figure out what the differences are between the MT4, and the MT4S. I know the S has a backlight, but if that's it, it really isn't worth an additional $60. |
Re: mt 4 raido Yes, you can assign 1ch to two different switches. I like running the winch off the lever.. I'm not a big fan of buttons. The difference's between the 2 are minimal on the outside and what's different on the inside, isn't really any help in our side of the hobby. Bonus: backlight and smaller rx.. All I noticed between my 2 anyways... |
Re: mt 4 raido Quote:
If that's not an option, do you do anything to fail safe it? Thanks |
Re: mt 4 raido I got mine set up like that. I think i got it set up as a button swtching between 0% and 100% dual rate for the channel the winch is on. Then the lever for winch. |
Re: mt 4 raido theres a few modle of the mt 4 raido what one to get? |
Re: mt 4 raido 1 Attachment(s) Sorry.... Had to do it |
Re: mt 4 raido Quote:
The plain Jane MT-4 is still serving me well. So well, I haven't even bothered switching over to my MT-4s! |
All times are GMT -6. The time now is 02:37 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com