RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Tactic tx300 3rd channel for a winch (http://www.rccrawler.com/forum/electronics/563448-tactic-tx300-3rd-channel-winch.html)

RedlineMike 05-06-2016 01:00 PM

Tactic tx300 3rd channel for a winch
 
Have the standard tx that comes With the bomber & I'm trying to set up the 3rd channel to work with my winch, currently have a ssd ox up front with a heyok winch controller,
Can anyone help getting it to work as it currently just winds in or out,

RedlineMike 05-07-2016 05:15 AM

Re: Tactic tx300 3rd channel for a winch
 
anyone?

heyok 05-09-2016 12:05 PM

Re: Tactic tx300 3rd channel for a winch
 
I'm assuming that you have a three position winch controller and it just isn't seeing the center position.
Therefore, it sounds like you have your third channel set for two positions.
Check this by connecting a servo to CH3 and see how it moves. Does it swing left and right (two positions) or does it swing left, center and right (three positions)?

Once you get three positions working on that channel, assuming the winch controller is working properly, you should be good to go!
Feel free to send me a PM if you need more help.

thead 05-09-2016 03:55 PM

Re: Tactic tx300 3rd channel for a winch
 
just do what heyok said,i'm running that same controller and radio and mine works perfect,only thing i noticed when setting the third channel with the servo pluged in,try to center it perfect,seems to work best.1 position all the way left,2nd position all the way right,3rd position perfect center.

intimadationrc 05-27-2016 10:04 PM

Re: Tactic tx300 3rd channel for a winch
 
im trying same thing with same radio im ready to break it :( help

heyok 05-28-2016 06:31 AM

Re: Tactic tx300 3rd channel for a winch
 
Quote:

Originally Posted by intimadationrc (Post 5509767)
im trying same thing with same radio im ready to break it :( help

Did you try what I suggested (two posts back)?
What was the result?

bidzej 04-07-2018 09:05 AM

Re: Tactic tx300 3rd channel for a winch
 
I know that this is a bit of archeology, but I am currently trying to get that CH3 to work as it should with a 3racing winch...

This 3-position programming only solves the problem partially. As long as the TX is switched on BEFORE Rx (which ofc is a good practice), everything is running fine. But if Rx is switched on when Tx is not, CH3 automatically goes to it's default position - which of course causes the winch to run.


All times are GMT -6. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com