Castle Bec Question 1 Attachment(s) I realize there are posts on this subject already, but there are so many different was to do this, I just want to be sure I'm about to do this soldering the right way. I have a rx bypass installed and need to know if the wires from the BEC, in my hand in the picture, go to the lead going to the battery? TIA |
Re: Castle Bec Question Yep, that's the main battery leads for the bec. |
Re: Castle Bec Question Thanks JohnRob, I thought so but I wanted to be positive! Appreciate it! |
Re: Castle Bec Question Quote:
Very well made! |
Re: Castle Bec Question The side with x2 wires is the +/- to the battery. (Red/Black) ***************** The cable side is the one which is directed to the servo. Red/Black to servo (Orange) signal wire from the bec is not used unless you are programming via castle link. **So...this is cut** the signal wire "from the servo" will be the only wire going to the Rx CH1 The power & ground from the servo goto the BEC. Caution!! R/C is highly addictive!! |
All times are GMT -6. The time now is 01:58 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com