12v LED lights, how to power them So I am wanting to use some 12v 3w LED lamps on my Yeti. I have a BEC set at 6v which runs my servo and other led's. Two Guys Trail Gear has some TG-302 amber led's I want to use. What I need to know is this, What is the best way to step up 6v to 12v? I do not want to use an additional battery, 9v or not. I have seen some converters on ebay. However, I have no experience doing this so I'd appreciate some guidance. Thank you Bringing the pain since 1968 |
Re: 12v LED lights, how to power them I run mine right off of the battery connection. 3s is what I run and the 12v led's work fine...if you wish you can put a switch in the wire to toggle on and off...mine are on all the time...they dont draw enough juice to worry about. |
Re: 12v LED lights, how to power them Quote:
Bringing the pain since 1968 |
All times are GMT -6. The time now is 09:05 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com