What the newest cheap servo hotness?

[Frank211]

Check this out
https://jercustomdesigns.com/shop/DM...vos-p284315840



Sent from my LGMP450 using Tapatalk

[durok]

OMG, It's FRANK!!!

Where tha heck have ya been?



(hope you have been hangin' in there, with all the madness of the last year or so!)

[Frank211]

Originally Posted by durok

OMG, It's FRANK!!!



Where tha heck have ya been?







(hope you have been hangin' in there, with all the madness of the last year or so!)

I'm as good as i can be




So was on Amazon looking for a servo other than all these same manufacture servos with different names and upgrades, so found this one........
Comes with gears too!
https://www.amazon.com/dp/B08THLF1L1...ing=UTF8&psc=1

Sent from my LGMP450 using Tapatalk

[Voodoobrew]

There is no way I would spend $90 on this when the SHV v3 is only $30 more. I might pay $60.

[durok]

Originally Posted by Voodoobrew

There is no way I would spend $90 on this when the SHV v3 is only $30 more. I might pay $60.

Not that I'd get it, but when I click on the link it's only $50...

(my most recent purchase was a HH SHV500 v3, BTW)

EDIT:

Ah - he posted a $90 servo AND a $50 servo - my bad...

[themountain]

https://www.aliexpress.com/item/1005...3bf52e0evitPEx
same as above but:
45$ ..with shipping,servo horn and a spare set of gears
[IMG][/IMG]

[ovidiugm]

Can't find any comparative / quantitative / torture test for the DMOND "Monster Killer Servo" servos:
DBS65168V
DBS6084V
DBS5084V
Anyone found one and could share? Thanks!

[1tonscout]

Originally Posted by Frank211

Check this out
https://jercustomdesigns.com/shop/DM...vos-p284315840



Sent from my LGMP450 using Tapatalk

Do you also go by Beat95yj on another site?

[Frank211]

Originally Posted by 1tonscout

Do you also go by Beat95yj on another site?

No sir,why?


This is the only rc site ive been on,other than when it was up, Ultimate rc.

[1tonscout]

Originally Posted by Frank211

No sir,why?


This is the only rc site ive been on,other than when it was up, Ultimate rc.

There's a guy name frank that's a pretty big deal on Irate4x4.com and Pirate4x4.com. He's been in a couple tv shows for 1:1 trucks. He's in a wheelchair and pretty funny guy.

[JohnRobHolmes]

Originally Posted by ovidiugm

Can't find any comparative / quantitative / torture test for the DMOND "Monster Killer Servo" servos:
DBS65168V
DBS6084V
DBS5084V
Anyone found one and could share? Thanks!

I was sent samples to entice me and I forwarded them to a 3rd party tester. Let's just say they barely hit 60% of the ratings. Wasn't a surprise.

[themountain]

Originally Posted by JohnRobHolmes

I was sent samples to entice me and I forwarded them to a 3rd party tester. Let's just say they barely hit 60% of the ratings. Wasn't a surprise.

Well...they drop out of the same mold than JX servos ...so no surprise really.

[el_Fernando]

I'll get one just for the name "monster killer servo" and also because it has a diamond logo on it

[mikemcE]

Originally Posted by JohnRobHolmes

I was sent samples to entice me and I forwarded them to a 3rd party tester. Let's just say they barely hit 60% of the ratings. Wasn't a surprise.

JRH are these more of the “JX clones” stolen designs ?


Hang up and Drive

[ovidiugm]

Originally Posted by JohnRobHolmes

I was sent samples to entice me and I forwarded them to a 3rd party tester. Let's just say they barely hit 60% of the ratings. Wasn't a surprise.

Thanks John for the feedback! In light of various test results on youtube, where brand servos reach maybe 75% of rated specs, this might not be so bad.

For my peace of mind when ordering cheap servos, I usually consider chinese Nm to be some special, smaller Nm , more like half the usual magnitude .

[themountain]

Originally Posted by ovidiugm

For my peace of mind when ordering cheap servos, I usually consider chinese Nm to be some special

Well...to ease your mind...95% of all servos are chinese

[Frank211]

It's not a budget servo just thought I'd put it here and not start a new thread.





https://www.corruptcarbonworks.com/s...Direct_4s.html

Sent from my LGMP450 using Tapatalk

[themountain]

Its a rebranded AGFrc too

[clm]

Been a LONG time since I posted on these boards, I have kind of gotten back into the hobby with the purchase of a 3d printer at the beginning of the year.

Now I have a question that this servo forum post might answer? I am looking for a high torque waterproof steering servo that is slowish, I put a promodeler 630 in my trx4 and.. well the little guy in the cab must be The Flash crosses with the Hulk lol.

I am assembling a 3dsets Rancher, a p407, and a 3d printed Hmmwv from Antnesh on Cults3d and am looking for a servo that turns the wheels at a scale speed but still with plenty of torque.

Chris

[ferp420]

Originally Posted by ovidiugm

Thanks John for the feedback! In light of various test results on youtube, where brand servos reach maybe 75% of rated specs, this might not be so bad.

For my peace of mind when ordering cheap servos, I usually consider chinese Nm to be some special, smaller Nm , more like half the usual magnitude .

kinda like the mertic minute 100 seconds instead of 60 seconds for exsample on a microwave