Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? I just picked this up for my wraith kit. Just need the electronics to complete. I am familiar with hobbywing after using a brushless setup for my Yeti and knew this was the go to company for a budget friendly ESC. The cost for what you get far exceeds the more expensive brands. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Quote:
|
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Ha! Yeah, everyone thinks helicopters are really sedate and somehow like drones...err...no...lol They are insane and totally addictive...but really, REALLY hard to fly...and very dangerous. Quote:
|
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Quote:
Think he was sponsored by Airtronics during his competitions. He'd fly his just like you do. Too expensive for me when a mistake is made :cry: But yeah... IMO servo speed is not as critical in a crawler as it is for an RC helicopter. I'm sure stunt helicopters still require a respectable amount torque. But it's definitely got to be a really fast servo to do what you're doing. My Savox 1230 isn't even close .16/60* @ 6.0v = 500 oz-in ( 36 kg-cm ) My Savox 2290 fairs better .13/60* @ 7.4v = 695 oz-in ( 50.04 kg-cm ) but neither hold a candle to the speeds you utilize. But an RC crawler is not an rc helicopter and share little in common. My bad on the drones... I forgot they don't use servos. Guess you can tell I don't own one !? Lol |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Quote:
Is that guy in the UAE?? Tareq Alsaadi sounds Arabic....?? |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? So one could assume that the internal BEC would not be able to hold up to both a servo and a servo winch? |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Seen a few peopl on one of the Axial pages on FB saying the run these on 3s with no issues. 3s on 20t barely gets warm and another with 3s on 35t and 500oz/in servo on internal BEC and works great. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? I ran two 25 minute courses today with the 1080 on 3s and a 35t motor. Used a solar d772 on 7.4. No bec. Worked like a champ. Sent from my iPhone using Tapatalk |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? I've only had my SCX10 II up and running for a few days, but I'm running the 1080 ESC. Between this and a Sidewinder 3, the 1080 worked better. For the price I'm not sure you could beat it. Instead of messing with Castle Link, the $40 price included a program card. I'd have no problem buying it again. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Im ordering two more for my other rigs this week. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? loved the heli u-tube , I can relate, built my first 450 heli, first flight was by one of the best in the world. My first flight and lots after made me a very competent repairer of broken flying machines, was no good at flying them. Hence, tiny trucks, different genre, but, equally as challenging. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Tried my 1080 now. Old Venom 17t brushed motor SCX10 chassis with 1.9's (weighted) 15/87 gearing 3s lipo No external BEC 20KG servo After about an hour of trailing / bashing the ESC barely got luke warm Lots of settings to play with. Only downside i had is the cable that connects to the ESC to programme it is a little loose and can lose connection if you're not absolutely still whilst changing settings. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Quote:
|
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? I'm running the WP1080 on my GCM Skeleton build and I'm very impressed with it. I've run many HW ESC's in many other buggies and such and always thought they worked great, the programming card is easy to use and way better than damn flashing LED's! |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Just got one of these in a trade, I've always used HH or castle stuff so I'm curious how this will do. Great price new and the programmer is super easy to use. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? What is the lvc for lipos with this esc? The manual speaks only about lvc for Ni-Mh batteries. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? I have one that's going to go in my TF2 running a tekin 55t motor and savox 1231sg servo with BEC. Can't wait to try it out. Heard nothing but great things about this ESC. Sent from my SM-G920V using Tapatalk |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? I won another one at a raffle this past weekend. So that makes two I own. My mom got me one for my bday last week, so thats the three I need for my rigs. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? I've been beating on mine for a couple weeks now, seems to be the budget ticket for sure. Just a 35t but it doesn't even give it a workout running 5000 mah back to back. The lighted push button on/off is pretty cool too. |
Re: Anyone using the Hobbywing QUICRun WP 1080 ESC? Quote:
|
All times are GMT -6. The time now is 05:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com