RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC (http://www.rccrawler.com/forum/electronics/580749-hobbywing-quicrun-waterproof-1080-brushed-crawling-esc.html)

LSXGMC 02-27-2017 07:36 PM

Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
I just received my new Hobbywing QuicRun 1080 in the mail and thought I'd post a few photos for those of you that are curious about this new self-entitled "Game Changer". Let me start out by saying I've owned a few Castle Sidewinder 3's, the stock Vaterra Ascender Dynamite ESC, a Castle Mamba Max Pro, and a Holmes Hobbies BRXL (Waterproof). I bought this unit because I'm hoping I can really avoid a BEC as advertised with its 7.4V capable internal BEC, it's waterproof, it's small, and it's cheap!

I ordered this ESC from Amain Hobbies, where it retails for $41.99.

Features:
- Water-proof and dust-proof, suitable for all weather races.
- Small size, with built-in capacitor module.
- 100% Waterproof
- 15 programmable parameter items
- PWM Frequency: 1K/2K/4K/8K/16K Adjustable
- Freewheeling (DEO) capability
- Drag brake rate in 9 levels (adjustable)
- Electronic switch
- Aluminum case for great heat dissipation
- Great current endurance capability.
- Great built-in BEC output capacity.
- Automatic throttle range calibration, easy to use.
Multiple protections:
- Over Voltage Protection
- Low voltage cut-off protection for battery
- Over-heating protection
- Throttle signal loss protection, and much more

It comes in a nice little package wrapped in plastic
https://uploads.tapatalk-cdn.com/201...6082fbb04a.jpg

https://uploads.tapatalk-cdn.com/201...842734a549.jpg

Untouched contents of the box

https://uploads.tapatalk-cdn.com/201...0747372aec.jpg

https://uploads.tapatalk-cdn.com/201...3ad8998491.jpg

There's a few cool things in the box, including:
- Programming card
- Decal sheet
- Two sided tape
- Red and black heat shrink tubing
- Instruction Manual (one for ESC, one for Programming Card)
- Two cable ties
- servo extension

https://uploads.tapatalk-cdn.com/201...db6fe2f954.jpg

The programming card doesn't feel as cheap as I expected (although it's far from premium), and looks fairly simple to use

https://uploads.tapatalk-cdn.com/201...1c66ed6608.jpg

https://uploads.tapatalk-cdn.com/201...193ca7c565.jpg

The ESC itself seems like fairly decent materials were used. The wires are flexible silicone coated, and the on/off switch has a decent length of wires to it for placement

https://uploads.tapatalk-cdn.com/201...3fa2786419.jpg

https://uploads.tapatalk-cdn.com/201...f5a308c78c.jpg

I plan on putting this in my new SCX10 II paired with a Traxxas 550 can 21T motor. I've heard great things and will post updates once I get it installed and running. I'm hoping that it is silent as others have indicated, I can't stand the beep sounds on the sidewinder 3. The Holmes BRXL has silent mode and it is truly a different experience trailing without that annoying sound.

For $42, I'm very happy with my purchase so far. The materials, even on the packaging, have an unexpectedly premium feel and I have high hopes for this nice little unit!

akatz 02-27-2017 07:43 PM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Quote:

Originally Posted by LSXGMC (Post 5674326)
I just received my new Hobbywing QuicRun 1080 in the mail and thought I'd post a few photos for those of you that are curious about this new self-entitled "Game Changer". Let me start out by saying I've owned a few Castle Sidewinder 3's, the stock Vaterra Ascender Dynamite ESC, a Castle Mamba Max Pro, and a Holmes Hobbies BRXL (Waterproof). I bought this unit because I'm hoping I can really avoid a BEC as advertised with its 7.4V capable internal BEC, it's waterproof, it's small, and it's cheap!

I ordered this ESC from Amain Hobbies, where it retails for $41.99

Features:
- Water-proof and dust-proof, suitable for all weather races.
- Small size, with built-in capacitor module.
- 100% Waterproof
- 15 programmable parameter items
- PWM Frequency: 1K/2K/4K/8K/16K Adjustable
Freewheeling (DEO) capability
- Drag brake rate in 9 levels (adjustable)
- Electronic switch
- Aluminum case for great heat dissipation
- Great current endurance capability.
- Great built-in BEC output capacity.
- Automatic throttle range calibration, easy to use.
Multiple protections:
- Over Voltage Protection
- Low voltage cut-off protection for battery
- Over-heating protection
- Throttle signal loss protection, and much more

It comes in a nice little package wrapped in plastic
https://uploads.tapatalk-cdn.com/201...6082fbb04a.jpg

https://uploads.tapatalk-cdn.com/201...842734a549.jpg

Untouched contents of the box

https://uploads.tapatalk-cdn.com/201...0747372aec.jpg

https://uploads.tapatalk-cdn.com/201...3ad8998491.jpg

There's a few cool things in the box, including:
- Programming card
- Decal sheet
- Two sided tape
- Red and black heat shrink tubing
- Instruction Manual (one for ESC, one for Programming Card)
- Two cable ties

https://uploads.tapatalk-cdn.com/201...db6fe2f954.jpg

The programming card doesn't feel as cheap as I expected, and looks fairly simple to use

https://uploads.tapatalk-cdn.com/201...1c66ed6608.jpghttps://uploads.tapatalk-cdn.com/201...193ca7c565.jpg

The ESC itself seems like fairly decent materials were used. The wires are flexible silicone coated, and the on/off switch has a decent length of wires to it for placement

https://uploads.tapatalk-cdn.com/201...3fa2786419.jpg

https://uploads.tapatalk-cdn.com/201...f5a308c78c.jpg

I plan on putting this in my new SCX10 II paired with a Traxxas 550 can 21T motor. I've heard great things and will post updates once I get it installed and running. I'm hoping that it is silent as others have indicated, I can't stand the beep sounds on the sidewinder 3. The Holmes BRXL has silent mode and it is truly a different experience trailing without that annoying sound.

For $42, I'm very happy with my purchase so far. The materials, even on he packaging, have an unexpectedly premium feel and I have high hopes for this nice little unit!


Sent from my iPhone using Tapatalk



Good write up!
I'm patiently waiting for my 1080 to arrive and pretty much went this route for all the same reasons you stated.
I went with the HH 21t 550 though, couldn't pass it up for $22 shipped on eBay.
Can't wait to hear how it preforms!

Junkk5 02-27-2017 07:56 PM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Thank you for the info. I am ordering one of these after several recommendations I received here. Looks like a well made esc, and I like the power switch has a long lead. Can't wait till I get mine.

Hardcoretam 02-27-2017 08:03 PM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Good write up.

The only crawler like ESC i owned before this one was my AE-2.
I'm still quite fond of the AE-2, especially when waterproofed but this trumps it in every way.

The only slight complaint i had, is the where the cable for the programming box sits on my ESC, it's a little loose for some reason. If i'm not careful it can move when programming it, and it causes it to crash. Simple reboot fixes it, but can be annoying having to be so delicate.
I may just be unlucky though as i've spoke to some other 1080 users and they didn't experience this issue.

It's not enough of an issue to make me feel annoyed either.
I opted for it as well so i could avoid using a BEC. I'm running a Power HD Servo that's 20Kg @ 6.6v but running it at 6v instead. Tempted to try it at 7.2v though as it's relatively cheap to replace.
With that servo, weighted wheels, a 17x2 motor and 3s lipo it didn't even get warm where i live. Granted it's Scotland and pretty cold but pretty impressed.

More settings than i know what to do with and low end control feels very smooth on it, even with cheapo motors. Build quality feels nice as well, especially for the price.

I do get a small whine as you can hear at the start when crawling but this was with "freewheeling" mode off

<iframe width="560" height="315" src="https://www.youtube.com/embed/-uEepP5v_Lc?rel=0" frameborder="0" allowfullscreen></iframe>

mhowzit 02-27-2017 08:05 PM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
I have 3 of these and love them. A note on the internal BEC. It's rated at 3A, but if you do enough searching, you'll find that it also has a 6A peak. That should work fine with servos that have a 5A stall and not brown out your receiver. How long it can maintain that 6A peak, who knows? I haven't tested that.

LSXGMC 02-27-2017 09:25 PM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Got it all mounted up. I switched the battery connector over to a Deans style to math the rest of the fleet. I shortened up the motor wires and soldered them directly to the motor to clean it up a bit, and mounted the on/off/programming switch beside the receiver box. It all fits very well and it's small size is VERY noticeable over a SW3 or a BRXL.

I didn't have any issues with the programming wire connection to the ESC, mine fits fairly snug. I still need to hide the wires for the switch into the receiver box to clean it up a little more, but I'm going to wait until my body gets here so I can make sure this is where the switch will go.

https://uploads.tapatalk-cdn.com/201...0c0cca43a7.jpg

I was pretty disappointed to hear the whine/electrical noise when I pulled the throttle. I thought I'd read that this thing was silent on these forums, I must have misunderstood. Pretty bummed about that, but it's not a deal breaker.

For those that might care, the on/off switch is illuminated
https://uploads.tapatalk-cdn.com/201...cacbfd23ee.jpg

It'll be a few weeks before I can drive this truck, but I'm still very satisfied with this purchase so far. Game changer, doubtful, but best bang for the buck, it'll take a lot to prove that one wrong.


Sent from my iPhone using Tapatalk

mhowzit 02-28-2017 12:23 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Quote:

Originally Posted by LSXGMC (Post 5674396)
I was pretty disappointed to hear the whine/electrical noise when I pulled the throttle. I thought I'd read that this thing was silent on these forums, I must have misunderstood. Pretty bummed about that, but it's not a deal breaker.

That has something to do with the PWM frequency of the ESC and the type of motor. On mine I get that whine when I run a cheap but trusty RC4WD 35t. When I swap in a Holmes Hobbies 13t it is much quieter. Even with the RC4WD motor, it is not as loud as that motor being pushed by the AE-5 esc.

rustneversleeps 02-28-2017 12:32 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Quote:

Originally Posted by mhowzit (Post 5674440)
That has something to do with the PWM frequency of the ESC and the type of motor. On mine I get that whine when I run a cheap but trusty RC4WD 35t. When I swap in a Holmes Hobbies 13t it is much quieter. Even with the RC4WD motor, it is not as loud as that motor being pushed by the AE-5 esc.

that good to know there is a setting for that on the box and wonder what it was for.Will have to check mine tomorrow and see if i get that sound and I'm running 17T motor....

SCREAMER 02-28-2017 01:58 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
I'm still loving mine, hands down this is the best bang for the buck ESC and I've had zero issues running without an external BEC while pushing a Hitec 7954sh at 7.4v. This is an excellent ESC and "budget" should not be a word used to describe it. I'm currently running it in my heavyish 10.2 with a Holmes Crawlmaster 13t. Never gets warm, smooth control, plenty of tuning options (more than the SV3), I'm a Hobbywing fan now.

UGLY 02-28-2017 02:20 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
I run dual 1080's in my bully. Great esc

https://preview.ibb.co/d8AagF/20170222_222822.jpg
image uploader

J55TTC 02-28-2017 05:52 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Ive got one on I'm scx10-2 and its really good!

The only problem I'm having is keeping the power button stuck down to the chassis

redemon 02-28-2017 06:37 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
I have two and one more on the way.
Hobbywing knocked it out of the park with this one.
If you want to stay brushed this is the way to go IMO.

JatoTheRipper 02-28-2017 07:19 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Good write up. I thought about doing the same when I got mine, but I'm lazy. :lmao:

Best bang for the buck ESC for sure. I really hope this ESC is given a chance by more people by newbies and veterans alike. And I also hope it opens their eyes to the world of HobbyWing.

redemon 02-28-2017 07:52 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
I hope Hobby Wing starts making more things geared toward the crawling world.

hillbillyrc 02-28-2017 08:23 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
After seeing all the posts on this esc, I have found my replacement esc for my rtr esc. I like that fact that I don't have to get a bec if I don't have to.

LSXGMC 02-28-2017 08:41 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Quote:

Originally Posted by JatoTheRipper (Post 5674498)
Good write up. I thought about doing the same when I got mine, but I'm lazy. :lmao:

Best bang for the buck ESC for sure. I really hope this ESC is given a chance by more people by newbies and veterans alike. And I also hope it opens their eyes to the world of HobbyWing.



To be honest, you're probably the reason I bought it lol. I see you vouch for it all the time, so I figured I'd give it a shot.

LSXGMC 02-28-2017 08:43 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Quote:

Originally Posted by J55TTC (Post 5674475)
Ive got one on I'm scx10-2 and its really good!

The only problem I'm having is keeping the power button stuck down to the chassis


The key with two sided tape is to make sure you get all the oils off the plastic from the moulding process with something like Simple Green. Then use a good two sided tape (3M), apply it, and press firmly on it for about 30 seconds so it sets. I used to have trouble too till I found this process and haven't had an issue since.

JatoTheRipper 02-28-2017 08:54 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Quote:

Originally Posted by LSXGMC (Post 5674539)
To be honest, you're probably the reason I bought it lol. I see you vouch for it all the time, so I figured I'd give it a shot.

Oh no! That's too much pressure. :lmao:

Just kidding. I'm glad you tried it and even more glad that you actually like it. "thumbsup"

rustneversleeps 02-28-2017 09:04 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
has any body tried the PWM frequency settings or just left in factory setting like i did...

LSXGMC 02-28-2017 10:03 AM

Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC
 
Quote:

Originally Posted by rustneversleeps (Post 5674554)
has any body tried the PWM frequency settings or just left in factory setting like i did...

Was wondering the same thing myself. It's a little too technical for me to understand.


All times are GMT -6. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com