06-22-2017, 09:56 AM | #161 | |
Newbie Join Date: Apr 2008 Location: Overland Park
Posts: 27
| Re: Mamba Firmware V2.02 Quote:
If it is already set for With or Without Reverse then the radio signal isn't going low enough to engage the Rock Race mode; to fix this you will need to increase the value of the low endpoint on the auxiliary channel. Hope this helps! Thomas Porfert Tech Support Castle Creations | |
Sponsored Links | |
06-22-2017, 11:45 AM | #162 | |
Newbie Join Date: May 2017 Location: san jose
Posts: 6
| Re: Mamba Firmware V2.02 Quote:
| |
06-24-2017, 07:57 PM | #163 |
Newbie Join Date: Jan 2017 Location: Orlando
Posts: 37
| Re: Mamba Firmware V2.02
Is there any way to run the mamba x firmware on a mamba max pro esc ?
|
06-24-2017, 09:51 PM | #164 |
Quarry Creeper Join Date: Jan 2017 Location: Olathe
Posts: 361
| Re: Mamba Firmware V2.02 There is not. The hardware of that ESC doesn't allow for most of the features of 2.02 and while we routinely offer firmware updates for our products that include new features, once a product has been replaced by a newer product we only release new firmware for it if critical bugs are discovered.
|
06-24-2017, 10:41 PM | #165 | |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: Mamba Firmware V2.02 Quote:
| |
06-24-2017, 11:16 PM | #166 |
Pebble Pounder Join Date: Aug 2016 Location: N/A
Posts: 178
| Re: Mamba Firmware V2.02
I love the the new features in v2.02, but got a question about the crawler/rock racer mode. In short, it works. But I find that the aux drag brake value that causes the transition from normal reverse to crawler reverse is much higher than the castle link drag brake setting. For example, I have now set my Castle link drag brake to only 5%, but I still need to set my AUX drag brake to about 30% (just eye-balling visually on my 4PLS display), for the instant reverse to engage. Ideally, I want instant reverse to engage at about 20% aux drag brake. Does anyone else have this problem? Are there any other settings I should change in either Castle Link or my 4PLS? |
06-24-2017, 11:48 PM | #167 | |
Quarry Creeper Join Date: Jan 2017 Location: Olathe
Posts: 361
| Re: Mamba Firmware V2.02 Quote:
A few things might be making this look strange. -100% to +100% on the radio is 1.0ms to 2.0ms. Our value scales between 1.1ms and 1.9ms. So it will not even begin to raise the drag brake from 0% until -80%. We also put a slight curve to the drag brake values. We found that people that used low drag brake values wanted really fine control in the 0-20% range, and that people that used the 75%+ range didn't notice as much difference between increments. So it is entirely possible that -70% on your radio actually equates to 5% drag brake. Like I said, run some tests to feel different values and look at your datalogs to see what you are actually using. | |
06-24-2017, 11:49 PM | #168 |
Quarry Creeper Join Date: Jan 2017 Location: Olathe
Posts: 361
| Re: Mamba Firmware V2.02 |
06-25-2017, 06:37 AM | #169 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Mamba Firmware V2.02
I think Thomas has been here longer than Robert. I'm glad they both are here! Hang up and Drive Last edited by mikemcE; 06-25-2017 at 07:07 AM. |
08-25-2017, 05:40 PM | #170 |
Quarry Creeper Join Date: Sep 2010 Location: appleton
Posts: 357
| Re: Mamba Firmware V2.02
Would anything in the programming besides the throttle limit make make max throttle roughly half of what it should be. I was setting up the aux channel to change my drag brake and I now seem to have only half throttle. I changed from sensorless only to smartsense as well. Sent from my SAMSUNG-SM-G935A using Tapatalk Last edited by wblteen; 08-25-2017 at 05:44 PM. |
08-25-2017, 07:09 PM | #171 |
I wanna be Dave Join Date: Apr 2015 Location: Roseville, Ca
Posts: 2,506
| Re: Mamba Firmware V2.02
Maybe a setting didn't save. Go back into the settings and check your on rock racer/crawler mode.
|
08-25-2017, 10:01 PM | #172 |
Quarry Creeper Join Date: Sep 2010 Location: appleton
Posts: 357
| Re: Mamba Firmware V2.02
I didn't set it to that. I set the aux to drag brake. Sent from my SAMSUNG-SM-G935A using Tapatalk |
08-26-2017, 12:32 PM | #173 |
Pebble Pounder Join Date: Mar 2016 Location: Mountains
Posts: 181
| Re: Mamba Firmware V2.02
Ok so I need some help with the castle link. My esc was set up by my local hobby shop when I bought it so I never messed with it. This was back in march. I just now was able to purchase a castle link so I can try to adjust everything BUT I have no flippin clue what I am doing. I dont want to mess anything up Any help and or pointers would be greatly appreciated. Thank you
|
08-26-2017, 01:31 PM | #174 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: Mamba Firmware V2.02
Go to castle and upgrade your software. Then go to the demo mode. You can look at all adjustments, they all have a helper , click for function info.... not tricky at all, go for it, if worried screenshot all menus before. That's what you will see Hang up and Drive |
08-26-2017, 02:28 PM | #175 | |
Pebble Pounder Join Date: Mar 2016 Location: Mountains
Posts: 181
| Re: Mamba Firmware V2.02 Quote:
| |
08-26-2017, 02:51 PM | #176 |
RCC Addict Join Date: Jun 2016 Location: Germany
Posts: 1,364
| Re: Mamba Firmware V2.02
just unplug the esc from the rx and connect castle link to the esc using the rx cable of the esc. |
08-26-2017, 03:31 PM | #177 |
Pebble Pounder Join Date: Mar 2016 Location: Mountains
Posts: 181
| Re: Mamba Firmware V2.02 |
08-26-2017, 03:34 PM | #178 |
RCC Addict Join Date: Jun 2016 Location: Germany
Posts: 1,364
| Re: Mamba Firmware V2.02
No ESC is powered by the USB during Connection Just unplug and Hock up Gesendet von meinem Nexus 5 mit Tapatalk |
08-26-2017, 03:41 PM | #179 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: Mamba Firmware V2.02 |
08-26-2017, 03:46 PM | #180 |
Pebble Pounder Join Date: Mar 2016 Location: Mountains
Posts: 181
| Re: Mamba Firmware V2.02 |
Mamba Firmware V2.02 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
castle firmware update1.46 | JesterSpec | Axial Yeti | 7 | 12-19-2014 08:33 AM |
Sidewinder Micro firmware | dextan22 | Electronics | 6 | 04-18-2013 02:00 PM |
Castle Firmware | skid plate | Electronics | 2 | 01-11-2011 10:23 AM |
Glitching with New Castle Firmware | EXW | Electronics | 16 | 01-24-2010 07:56 AM |
Thread Tools | |
Display Modes | |
| |