|
| LinkBack | Thread Tools | Display Modes |
10-04-2017, 05:27 PM | #1 |
Newbie Join Date: Jun 2013 Location: North Carolina
Posts: 26
| HH Torquemaster BR Mini Dual connections
I just got a HH Torquemaster BR Mini Dual /w a CC BEC attached for a XR10 and am confused about the 3 small receiver style plugs where they plug into. 1 from BEC is a larger gauge wires than other 2 coming from ESC and none are labeled. Where do the 2 smaller connectors go? 1 Has to be throttle on rec but what is the other for? I do have a HH RX Bypass Adapter, so BEC connector goes there.
Last edited by White cobra; 10-04-2017 at 05:36 PM. |
Sponsored Links | |
10-04-2017, 06:53 PM | #2 |
Rock Crawler Join Date: Aug 2007 Location: Philadelphia
Posts: 797
| Re: HH Torquemaster BR Mini Dual connections
Both of those go into the receiver. Each ESC has a separate receiver plug. Most radio setups your front motor ESC will go into channel 2 and your rear motor ESC will go into channel 3. I know my Futaba 4PLS radio the rear motor ESC goes into channel 4 to use their pre-programmed channel mixing but that's not the normal case. You'll probably be using channel 2 and 3. Channel 1 should be your steering servo as usual. You'll need to pull the power wire on the second ESC that isn't running through the bypass adapter.
|
HH Torquemaster BR Mini Dual connections - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why wont my Holmes TorqueMaster BR Mini Dual stay in nautral ? | g-jero | Electronics | 7 | 06-12-2014 02:19 AM |
TorqueMaster Mini | Blazerbogger | Electronics | 14 | 09-01-2010 04:13 PM |
Dual TorqueMaster BR-XL's?? | 53 willys | EnRoute Berg | 4 | 12-10-2009 08:34 PM |
| |