Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics


Thread: Tactic Tr325 3rd channel set failsafe position?

LinkBack Thread Tools Display Modes
Old 10-17-2017, 05:16 PM   #1
Join Date: Sep 2017
Location: Australia
Posts: 1
Default Tactic Tr325 3rd channel set failsafe position?


I'm running a servo winch via an old ae-2 ESC off a Tactic TR325 (TTX300 system) 3rd channel.

Everything is calibrated fine and working well. I've programmed the third channel to use 3 positions (forward, neutral, reverse)

However, the receivers failsafe 'neutral' position for the third channel is full reverse, as opposed to a middle setting. This is causing the ESC to enter full reverse if the TX is turned off.

I've confirmed this is a receiver issue by plugging a servo into the third channel. The servo goes between three positions as expected,but when the TX is switched off it turns full right (as opposed to centering like the steering channel does)

I couldn't find any documentation on customising the third channel failsafe position, so I'm going to assume it isn't possible. However, if anyone has experience otherwise please let me know.
Major Clod is offline   Reply With Quote
Sponsored Links
Old 01-29-2018, 02:08 PM   #2
Quarry Creeper
Join Date: Aug 2013
Location: Canada
Posts: 266
Default Re: Tactic Tr325 3rd channel set failsafe position?

Don't know if i'm too late for you but i'm gonna post that for future guys needing that info :

To make the failsafe of the third channel to be the middle position when Tx is off, just put the 3rd channel to the middle position and re-bind the receiver. It will then remember that setting and will failsafe to all center on all channels.

-put 3rd chan to center
-power off receiver
-power on receiver while pushing the LINK button
daver18qc is offline   Reply With Quote

Tactic Tr325 3rd channel set failsafe position? - Similar Threads
Thread Thread Starter Forum Replies Last Post
Tactic tx300 3rd channel for a winch RedlineMike Electronics 6 04-07-2018 09:05 AM
m2 with 2 position 3rd channel? 7r0y801 Electronics 3 11-22-2012 06:23 PM
GT3B 3rd channel to 3 position stanmondz Electronics 21 01-20-2012 01:32 PM
Anyone know of a JR radio with 3 position 3rd channel? Jeepial Electronics 6 05-10-2009 11:06 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 01:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com