04-22-2018, 09:20 PM | #1 |
Newbie Join Date: Jan 2017 Location: SC Mtns
Posts: 12
| Which Tekin servo?
So the T-440, T-360 and T-300 all are the same size and cost. Why would you get anything but the T-440? About to pull the trigger for my SCX 10 ii. Thanks! |
Sponsored Links | |
04-23-2018, 03:16 AM | #2 |
Quarry Creeper Join Date: Jun 2016 Location: Grand Rapids
Posts: 376
| Re: Which Tekin servo? |
04-23-2018, 06:44 AM | #3 |
RCC Addict Join Date: Jan 2007 Location: Arkansas
Posts: 1,782
| Re: Which Tekin servo?
The T440 is best suited for crawlers but if torque is what you are after, skip the Tekin and get a Savox 2290. If you are dead set on the Tekin, dont waste your time running it at anything other than 8.4V. At 7.4 or below the Tekin is not even close to the 2290 in speed or torque. Really, at 7.4v and below my Hitec 7955s seem stronger and faster than the Tekin T440 at the same voltage. I do admit the Tekin is noticeably quieter and smoother than the Savox or Hitec servos that I have used plus it is waterproof from the factory. |
04-23-2018, 03:57 PM | #4 |
Newbie Join Date: Jan 2017 Location: SC Mtns
Posts: 12
| Re: Which Tekin servo?
Ahh....speed was the component I was missing in differentiating the models. Considering torque is king, going big.......appreciate the help! |
04-25-2018, 10:48 AM | #5 |
RCC Addict Join Date: Feb 2008 Location: Tekin, ID
Posts: 1,940
| Re: Which Tekin servo?
I run the T-360 in my scalers and T-440 in the Bomber. Both have more than enough real torque and I'm running them at 7.4V. |
04-27-2018, 12:46 PM | #6 |
Newbie Join Date: Jan 2015 Location: Liberty Twp
Posts: 24
| Re: Which Tekin servo?
I was curious when I saw these as well. I'm just finishing my build and already have a servo but I have a twin hammer V2 I just picked up and I'm in the process of building a solid axle MT and I'm thinking of trying one in the MT.
|
05-04-2018, 07:42 AM | #7 |
Newbie Join Date: May 2017 Location: Seattle
Posts: 3
| Re: Which Tekin servo?
How does the T-440 compare to the Holmes Hobbies SHV500? I’m looking for a quiet servo. I’m curious what the dead band setting is. I emailed Tekin support but of course never heard back. I hope that the dead band is set wide or is adjustable which is such a cool feature. I can’t find that spec/info anywhere? I use Holmes Hobbies servos usually because they’re so quiet, used to run Savox but got annoyed with the constant noise as the servos fight to remain perfectly centered even under really light use which isn’t really necessary for a crawler. The Holmes Hobbies servos are just so quiet!! But for my son’s rig I want a regular on/off switch so I think I might go the Tekin route and the torque appears to be higher at 7.4v. What do you guys think? I wish manufacturers would create videos to highlight the features of their products and not just shoot lame ass basher videos!! Didn’t mean to rant sorry, too much coffee already this morning haha! Btw I used to used Tekin gear back in the 80’s and 90’s in my race cars and never had a failure!
|
05-04-2018, 10:26 AM | #8 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Re: Which Tekin servo?
I'm sure the Tekin has the adjustability you are looking for. Can't comment on the noise, haven't heard one. I would choose the 360 for a 1.9 rig and the 440 for a 2.2 rig. |
05-05-2018, 05:16 PM | #9 |
Newbie Join Date: May 2017 Location: Seattle
Posts: 3
| Re: Which Tekin servo?
Thanks John, appreciate the comments! Any idea when your servos will be back in stock? Really love all of your gear btw and you guys have always been great with answering my questions! I heard back from Randy at Tekin! Good news! Read below. Looking forward to seeing the user guide. Anyway sounds like they will be great servos for crawlers. Pricey though at $169 plus $67 for the Hotwire... "The 440 and none of the tekin servos have the traditional "buzz" you're talking about. Don't get me wrong the servo will "work" if it's trying to center or come to a requested point by the radio system. But the "buzz" doesn't occur. We haven't released a "manual" at this time. We are nearly done with our user guide which is likely what you're interested in.* Dead band isn't adjusted in the sense you may consider. We have "profiles" of correction levels. In other words how aggressively the servo corrects deflection. Regards, Randy" |
05-06-2018, 09:43 AM | #10 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Re: Which Tekin servo?
Should have ours back in stock this week. Got stuck in customs, was supposed to be delivered over a week ago.
|
05-15-2018, 08:53 AM | #11 |
Newbie Join Date: May 2017 Location: Seattle
Posts: 3
| Re: Which Tekin servo?
Thanks John! Just grabbed a HV500v2, great price, great servo. I'll try a Tekin servo later on another rig, as this one is for my son. Really interested to try the adjustments they offer.
|
Tags |
scx 10 ii, servo, tekin |
Which Tekin servo? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tekin fxr gelande 2 servo twitch | Colin_rover17 | Electronics | 0 | 05-22-2015 01:44 PM |
| |