Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Hobbywing 1080 esc programming issue

Reply
 
LinkBack Thread Tools Display Modes
Old 06-19-2018, 10:58 AM   #1
Pebble Pounder
 
Join Date: Feb 2010
Location: riverside
Posts: 163
Default Hobbywing 1080 esc programming issue

So ive watched video and read the manual countless amount of times. I am using the 1080 esc from hobby wing with HH 27t 550 motor with stock tx/rx and running a turnigy 3s 2200 lipo. When i get the esc in calibration mode with the throttle it beeps once. Okay good. When i apply full fwd throttle and press the set button no beeps. When i put the throttle in full reverse and press the set button it beeps twice. Then full fwd throttle and press it beeps 3 times and it leaves calibration mode. So basically its set up to run flip flop from what it should. With the tx and esc on fwd is fwd and rev is rev. However fwd at full throttle is slow and reverse at full throttle is alot faster than fwd. anyone have a similar issue and what can i do to fix it


Sent from my iPhone using Tapatalk
CRAWLIN5150 is offline   Reply With Quote
Sponsored Links
Old 06-19-2018, 11:02 AM   #2
Rock Crawler
 
Join Date: Mar 2016
Location: Zagreb, Croatia
Posts: 747
Default Re: Hobbywing 1080 esc programming issue

Reverse motor wires and throttle on Tx, recalibrate.
Check your reverse speed in ESC settings too.
Ninomaniac is offline   Reply With Quote
Old 06-19-2018, 11:05 AM   #3
Pebble Pounder
 
Join Date: Feb 2010
Location: riverside
Posts: 163
Default Re: Hobbywing 1080 esc programming issue

Quote:
Originally Posted by Ninomaniac View Post
Reverse motor wires and throttle on Tx, recalibrate.
Check your reverse speed in ESC settings too.


Damn you are quick! awesome. So basically the setup configuration is a little wacky but fwd is fwd and rev is rev so thats good. All i did was use the program card and put max rev to 100% and fwd is fast. Rev is fast and i got it setup just the way i want. The calibration process had me worried because it wasnt working right but still works for what i want. Thank you!!
CRAWLIN5150 is offline   Reply With Quote
Reply



Hobbywing 1080 esc programming issue - Similar Threads
Thread Thread Starter Forum Replies Last Post
Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC LSXGMC Electronics 450 06-27-2020 09:06 PM
Anyone using the Hobbywing QUICRun WP 1080 ESC? CoolRunning Electronics 143 04-28-2020 08:48 AM
Hobbywing 1080 settings Jboucher Electronics 80 04-25-2020 02:48 PM
Hobbywing 1080 krazee Traxxas TRX-4 2 12-21-2017 09:03 PM
novac esc and programming issue robert3719 Electronics 6 12-27-2011 09:35 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com