RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Light issue SCX-10ii (http://www.rccrawler.com/forum/electronics/604830-light-issue-scx-10ii.html)

Protosouls 12-22-2018 08:52 PM

Light issue SCX-10ii
 
Hello all!

Today I attempted to install a little tow truck orange light bar. It had a standard 3 plug receiver plug on it, so I plugged it into the receiver into channel 3 and I could operate the different modes and even turn it off with the channel 3 buttons on the remote. However as soon I go forwards with some haste, the lights turn off and will not turn back on with the buttons until I unplug the light and plug it back in. Then it works again until I drive the truck again and it turns off again.

I have the standard remote and receiver for the SCX-10ii RTR also running an 8.4v 3000 mah NIMH battery.

Pretty stumped here, first time wiring lights but I don't see why this isn't working.


Thanks in advance!

MasteroFlego 12-22-2018 08:59 PM

Re: Light issue SCX-10ii
 
All I can think of is that the BEC in your ESC isn't strong enough, either get a Hobbywing 1080 or an external BEC like a Castle or a heyok.

Sent from my SM-G960W using Tapatalk

Voodoobrew 12-23-2018 01:24 AM

Re: Light issue SCX-10ii
 
or the NIMH voltage sag is to much for the lights to understand, borrow a friends lipo and see if it still has the issue.


All times are GMT -6. The time now is 04:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com