12-22-2018, 07:52 PM | #1 |
Newbie Join Date: Dec 2018 Location: Powhatan
Posts: 3
| Light issue SCX-10ii
Hello all! Today I attempted to install a little tow truck orange light bar. It had a standard 3 plug receiver plug on it, so I plugged it into the receiver into channel 3 and I could operate the different modes and even turn it off with the channel 3 buttons on the remote. However as soon I go forwards with some haste, the lights turn off and will not turn back on with the buttons until I unplug the light and plug it back in. Then it works again until I drive the truck again and it turns off again. I have the standard remote and receiver for the SCX-10ii RTR also running an 8.4v 3000 mah NIMH battery. Pretty stumped here, first time wiring lights but I don't see why this isn't working. Thanks in advance! |
Sponsored Links | |
12-22-2018, 07:59 PM | #2 |
Rock Crawler Join Date: Jul 2017 Location: BC, Canada
Posts: 742
| Re: Light issue SCX-10ii
All I can think of is that the BEC in your ESC isn't strong enough, either get a Hobbywing 1080 or an external BEC like a Castle or a heyok. Sent from my SM-G960W using Tapatalk |
12-23-2018, 12:24 AM | #3 |
I wanna be Dave Join Date: Feb 2017 Location: My mothers basement
Posts: 2,128
| Re: Light issue SCX-10ii
or the NIMH voltage sag is to much for the lights to understand, borrow a friends lipo and see if it still has the issue.
|
Light issue SCX-10ii - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Heyok light controller issue | scalemadness | Electronics | 5 | 10-13-2018 04:11 PM |
Punk Dig Issue, White light only! | OFFROADRCKOREA | Electronics | 2 | 03-26-2012 11:31 AM |
Thread Tools | |
Display Modes | |
| |