Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Yeti

Reply
 
LinkBack Thread Tools Display Modes
Old 12-27-2018, 08:54 PM   #1
Newbie
 
Join Date: Dec 2018
Location: Austin
Posts: 3
Default Yeti

Can I safely run mamba x with castle 1410 motor in my yeti?

Sent from my SM-G930VL using Tapatalk
Cypress72 is offline   Reply With Quote
Sponsored Links
Old 12-28-2018, 02:13 AM   #2
RCC Addict
 
Join Date: Jun 2016
Location: Germany
Posts: 1,268
Default Re: Yeti

I had a 1410 3800 KV 5mm unsensored in mine, paired with a Monster x. And it was fine. I only changed motor cause it was unsensored. Should be fine with a Mamba x also. I could gear mine up to 64/19 on 3s with no issues. And my Little Monster weights approx 10 lbs.

Gesendet von meinem Pixel 2 XL mit Tapatalk
magic_yeti is offline   Reply With Quote
Old 12-30-2018, 07:21 PM   #3
Newbie
 
Join Date: Dec 2018
Location: Austin
Posts: 3
Default Re: Yeti

Thanks brother a big help. I'm getting a lot of heat out of mine after just a minute or so

Sent from my SM-G930VL using Tapatalk
Cypress72 is offline   Reply With Quote
Old 12-30-2018, 08:36 PM   #4
RCC Addict
 
Voodoobrew's Avatar
 
Join Date: Feb 2017
Location: My mothers basement
Posts: 1,110
Default Re: Yeti

If it's hot:
1) check running gear for binding bearings and overtight gear mesh.
2) if not binding get smaller pinion.
Voodoobrew is online now   Reply With Quote
Old 12-30-2018, 08:46 PM   #5
Newbie
 
Join Date: Dec 2018
Location: Austin
Posts: 3
Default

Thanks. Running 2s 500mah 30 c. Getting hot fast. 19/64 opinion and spur. Gears all seem good in tranny

Sent from my SM-G930VL using Tapatalk

Debating on going with holmes puller pro or puller pro xl....thought?

Sent from my SM-G930VL using Tapatalk

Its clogging in reverse too

Sent from my SM-G930VL using Tapatalk

Last edited by THX_138; 12-31-2018 at 09:09 AM. Reason: Merged... posts a minute apart
Cypress72 is offline   Reply With Quote
Old 12-31-2018, 12:07 AM   #6
RCC Addict
 
Voodoobrew's Avatar
 
Join Date: Feb 2017
Location: My mothers basement
Posts: 1,110
Default Re: Yeti

Quote:
Originally Posted by Cypress72 View Post
Debating on going with holmes puller pro or puller pro xl....thought?

Sent from my SM-G930VL using Tapatalk
They could power a yeti no problem, but so should a castle 1410 motor.
maybe find some bearings to oil, that's really the only thing that wears out in the motor, replace them and good as new.
Voodoobrew is online now   Reply With Quote
Old 12-31-2018, 07:13 AM   #7
RCC Addict
 
Join Date: Jun 2016
Location: Germany
Posts: 1,268
Default Re: Yeti

Quote:
Originally Posted by Cypress72 View Post
Debating on going with holmes puller pro or puller pro xl....thought?

Sent from my SM-G930VL using Tapatalk

Nice options i changed to the puller pro R 540-L
I forgot to mentioned i have the 2 speed option in mine also i have installed the included cooling fan on my 1410.
But booth are great motors for the yeti and i would consider to change to 3s. i power mine with 5800mAh 65C 3S zippy compact lipo's.

(if it's not a typo500mAh is a little small)
magic_yeti is offline   Reply With Quote
Reply



Yeti - Similar Threads
Thread Thread Starter Forum Replies Last Post
Life of one YETI - Tom Frajer's Axial Yeti build log TomFrajer Axial Yeti 320 05-22-2017 09:01 PM
Yeti, Set, GO!!! FastEddy Bearings for the Axial Yeti FastEddy Axial Yeti 13 04-21-2015 07:33 AM
Yeti - Yeti XL Sway bars. UC fab Bling! Erik D_lux New Products and Great Deals 0 02-12-2015 07:53 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com